Automatic pull-out adhesion tester

NegotiableUpdate on 09/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Engel 510 automatic pull-out adhesion tester accurately measures the adhesion between coatings and substrates. The fully automatic hydraulic oil pump ensures smooth and continuous pressure application to provide coherent and repeatable results. The fully adjustable tension rate is 0.1-1.4 MPa/s (15-203 psi) to meet national and international standards. The forging dies with diameters of 10, 14.2, 20, and 50mm can be selected by users with customizable limits and unique pressure holding and release functions

Product Details

Jig 510 Automatic Pulling Adhesion Tester

The Engel 510 automatic pull-out adhesion tester accurately measures the adhesion between coatings and substrates.

The fully automatic hydraulic oil pump ensures smooth and continuous pressure application to provide coherent and reproducible results
Fully adjustable tension rate of 0.1-1.4 MPa/s (15-203 psi) to meet national and international standards
Selection of forging dies with diameters of 10, 14.2, 20, and 50mm
Users can customize restrictions and unique pressure maintenance and release functions
Users can customize the measurement range and accuracy with a scale of ± 1%:
- 10mm forging die: 100Mpa/14400psi
- 14.2mm forging die: 50MPa/7200psi
- 20mm forging die: 25MPa/3600psi
- 50mm forging die: 4MPa/580psi
Dustproof, waterproof, and sturdy design meets IP64 standards
Interchangeable units: Mpa, Psi, NMM²And N
A series of standard and thin substrate brake skirts (compatible with Yigao 506), suitable for testing coatings on thick, thin, flat, or convex substrates
Store up to 60000 readings with individual pull charts, up to 2500 alphanumeric batches, and complete fault information with attributes
USB and Bluetooth^®Data output - compatible with ElcoMaster^®Applications for iPhone, iPod, iPad, and Android mobile devices

Explain the main functions

The automatic adhesion tester can select forging dies with diameters of 10, 14.2, 20, and 50mm.	View trend charts or adjacent reading value statistics.	Individual user-defined pull-out rate charts can save each reading.


Store individual readings and pull-out rate charts, up to 2500 alphanumeric batches, along with date, time, and attribute information.	Either pull to the maximum size or pull to the preset limit. The unique time hold function allows users to set a delay before the pressure returns to zero.	Save the adhesion data according to national and international standards together with the adhesive detachment/cohesive detachment properties.

Powered by standard rechargeable batteries or AC power Each rechargeable battery can perform up to 200 pulls. The battery charging time is less than 300 minutes	Through USB or Bluetooth ® Transfer data to your computer and ElcoMaster ® Further analysis using software or in ElcoMaster ® View the pull-out rate chart of on-site testing.	Use wireless Bluetooth ® Communication link tester to an Android device ™ Or iPhone? Mobile devices can add GPS coordinates from your device to the report and send it instantly via email.


A series of standard and thin substrate brake skirts allow the instrument to be used with 10, 14.2, 20 or reusable 50mm diameter forging dies Very suitable for testing coatings on thick, thin, flat or convex substrates.	The optional magnetic anchor pliers ensure that the actuator does not fall off on the testing vertical surface or at the testing height.	Provided in a sturdy plastic carrying case for easy transportation to the work site.

*Only model T

Compatibility of iPod, iPhone, and iPad

Evaluation Results - Failure Attribute
Many national and international standards, including ISO4624 and ASTM D4541, require users to not only record the pulling force, but also to record the nature of fracture by inspecting the bottom of the forging die and evaluating adhesive force detachment/cohesive detachment. The 'Properties' function (menu/settings/instrument mode/advanced) in the' Advanced 'mode allows for the recording and storage of fracture properties for each reading.


Check the forging die
a) Cohesive detachment: refers to the detachment of the coating from the interior of the coating layer, leaving some on the surface and some on the forging die surface
b) Adhesive detachment: refers to the failure of the interface between layers (between coatings), where one layer pulls away from the other layers. The "coating" on the forging die will not be the same as the test area.
c) Degumming: If there is no coating on the forging die, it must be recorded as "debonding". This is usually due to incorrect or insufficient mixing of the adhesive components, incompatibility between the adhesive and the coating or forging die, and/or improper preparation of the test surface before testing


Cohesive detachment layer^d		Adhesive detachment layer
code	description	code	description
A	matrix	A/B	Matrix/* layer
B	*Layer	B/C	*Layer/Second Layer
C	the second layer	C/D	Second/Third Layer
D	the third layer	D/E	Third/Fourth Layer
E	the fourth floor	E/F	Fourth/Fifth Floor
F	the fifth floor	F/Y	Fifth layer&adhesive
Y	glue	Y/Z	Glue&Forging Die


The data is saved in the data group and can be viewed at any time, displayed as ##. ## MPa^eN% A M% A/B, Among them; ##. ## MPa^e=The unit of tension is MPa or other measurement units (psi, Newtons or Nmm)^-2) N%=percentage of cohesive detachment^f A=cohesive detachment layer M%=percentage of adhesive detachment layer^f A/B=Adhesive peeling layer between coatings

^dThe number of layers can be limited to each batch by the user through data group/new data group/layer limit. This will affect the selection of layers from the attribute recording process. The maximum number of available layers is 5, but it is not included in the substrate and adhesive ^eOr equivalent units ^fThe closest 10% to meet international standards

Model number: Elg 510, model number: Elg 510, model number: Elg 510, model number: Elg 510, model number: Elg 510, model number: Elg 510, model number: Elg 510 T : iPhone 6 Plus、iPhone 6、iPhone 5s、iPhone 5c、iPhone 5、iPhone 4s、iPhone 4、iPad Air 2、iPad mini 3、iPad Air、iPad mini 2、iPad（ In comparison to the 3rd and 4th generations, iPad mini, iPad 2, and iPod touch (4th and 5th generations), iPad mini, iPad 2, Made with iPod touch (4th and 5th generation).

Made for iPod "," Made for iPhone ", and" Made for iPad "mean an electronic accessory designed specifically to connect to an iPod, iPhone, or iPad, and certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Please note that using this attachment on iPod, iPhone, or iPad may affect wireless performance.

IPad, iPhone, and iPod touch are registered trademarks of Apple Inc., registered in the United States and other countries. The App Store is a trademark of Apple Inc., registered in the United States and other countries. Suitable for mobile devices running Android 2.1 software version and above. Android ™ Google Play is a trademark of Google Inc.

Automatic pull-out adhesion tester