Babbitt hardness tester 934-1

934-1Barcol impressor

﹡A lightweight indentation hardness tester
﹡One handed operation, no user experience required, can be tested in any situation as long as it is within reach
﹡Wide measurement range. It can be tested from very soft pure aluminum to particularly hard aluminum alloys, with an effective measurement range equivalent to Brinell hardness25～150HBW
﹡Widely applicable.934-1Type can be used to test aluminum and aluminum alloys, copper and copper alloys, fiberglass, hard plastics, etc.

Its improved version can be used to test special soft metals such as lead and tin, as well as soft plastics, rubber, felt, leather, etc
﹡High sensitivity. There are instruments available100A scale with much higher sensitivity than the commonly used Vickers hardness tester in the aluminum alloy industry
﹡No need for support. It can be tested by only touching one side of the sample, without the need to move or support the sample, suitable for ultra large, ultra thick workpieces and groups

Assembly parts
﹡Easy conversion. By using a conversion table, hardness values such as Brinell, Rockwell, Vickers, and Vickers can be obtained
﹡Compliant with Chinese standardsGB/T3854-2005, American StandardASTM B648-2000
﹡The Babbitt hardness tester is mainly used to test aluminum and aluminum alloys. The Vickers hardness tester is mainly used to test aluminum alloy profiles, plates, and pipes. The Babbitt hardness tester should be used to test pure aluminum, softer aluminum alloys, ultra thick aluminum alloys, aluminum alloy rods, and assembled aluminum alloy products (such as aluminum alloy doors and windows, fire ladders, etc.)
﹡Related standards:ASTM B648Test Method for Measuring the Hardness of Aluminum Alloys with a Buckle Hardness Tester
﹡The Babbitt hardness tester is also used to test fiberglass reinforced plastic (FRP), hard plastics, etc
﹡Related standards:GB/T3854-2005Method for testing the Bakool hardness of reinforced plastics
　　　　 　 ASTM D2583-07Test Method for Measuring the Indentation Hardness of Hard Plastics Using a Babbitt Hardness Tester
﹡The improved version of the Babbitt hardness tester can be used for softer plastics, very soft metals, leather, rubber, etc
press Needle: 26Truncated cone, end face diameter0.176mm

measure Cheng: 0～100HBa, equivalent to25～150HBW

divide distinguish Rate: 0.5HBa
Indication error: Hardness range:42～52HBa±2HBa Hardness range:84～88HBa±1HBa
Repeatability: Hardness range:42～52HBa±2HBa Hardness range:84～88HBa±1HBa
weight Quantity: 0.5kg

■ Standard configuration:

■ After sales service commitment: free one-year warrantyLifetime maintenance