Introduction to bear bile powder filling production line:

The cage type bottle washing machine is designed specifically for various small glass and plastic bottles, such as penicillin bottles, essential oil bottles, etc. It can automatically complete bottle sorting, rough washing, fine washing, and bottle discharge procedures. By flipping the bottle 90 degrees, it can alternately clean the inside and outside of the bottle and perform preliminary drying. Ultrasonic waves can be selected. The machine has a simple structure, reasonable design, easy operation and maintenance, and meets GMP requirements.

Characteristics of bear bile powder filling production line:

Continuous entry and exit of bottles, high efficiency;

The bottle flipping adopts a track type, without broken bottles;

Ultrasonic rough cleaning, alternating cleaning with high-pressure purified water and purified compressed air, high cleanliness;

The entry and exit of bottles are equipped with safety protection devices to prevent bottle breakage caused by the accumulation of bottles in subsequent processes;

Easy specification replacement;

All stainless steel structure, high output, low noise, easy maintenance, and reliable operation.

Technical Specifications:

Equipment Introduction:

Tunnel ovens are suitable for heating, solidifying, drying, and dehydrating materials in industries such as pharmaceuticals, chemicals, food, and light industry. They are also widely used for drying in heavy industries such as steel.

The heating source of this oven is electric heating, and the operating temperature can be adjusted according to user needs within the range of room temperature to 300 ℃. It is controlled by the control room control system for constant temperature.

The control panel features modern buttons and an intelligent temperature control meter, making it easy to operate and visually observe the operation of the equipment. The control instruments are precise, temperature control is sensitive and accurate, and easy to operate.

Principle and process:

The material is transported onto a slowly moving mesh belt, which then enters the heating section of the oven. The material is then heated by a heating tube, and any moisture or exhaust gas is discharged from the top of the box through a dehumidification outlet device before being naturally cooled by the cooling section. The mesh belt tunnel oven consists of a front feeding section, a heating section, a cooling section, a mesh belt conveyor system, a dehumidification device, an electrical control system, and other parts. The operating speed of the mesh belt and the constant temperature sterilization temperature of the heating section are controlled by a reducer, a speed controller, and an intelligent digital temperature control instrument. The whole machine has low operating noise, stable operation, automatic temperature control, easy installation and maintenance, and a wide range of applications.

Construction of oven equipment:

1. The inner wall of the box is made of δ 2.0mm stainless steel plate, and the outer wall is made of δ 1.5mm stainless steel plate. The insulation material is aluminum silicate fiber cotton, and the insulation layer thickness is 80mm.

2. The oven transmission adopts a continuously variable speed, so that customers can adjust different speeds according to different specifications to achieve the drying effect.

3. The equipment consists of heating, transmission, automatic cooling, and control parts. The heating device uses far-infrared heating tubes (stainless steel heating tubes can also be selected), and the transmission part uses stainless steel chains with stainless steel transmission, which can facilitate the placement of materials by customers. The transmission is controlled by frequency conversion, and the control part consists of a speed controller, an automatic digital temperature control instrument, and a solid-state temperature control device.

4. There are transmission platforms at both ends of the oven for customers to load and unload materials. Due to the high working temperature requirements, a cooling section needs to be added. There is an automatic cooling fan installed on the top cooling section of the equipment.

5. The heating section of the oven adopts a skeleton free structure, greatly reducing the sensitivity of the thermal conductivity system from the inside out.

6. The heating section of the oven is divided into two zones to ensure uniform temperature before and after heating, ensuring the drying effect.

7. An additional control cabinet is installed in the oven to separate the mechanical and electrical components for user operation.

8. The heating element of the oven adopts far-infrared heating tubes, which have the characteristics of fast heating and small temperature shock.

9. The transmission motor of the oven adopts phase sequence and phase failure protection to ensure that users will not be affected by motor failure caused by phase loss during use.

10. The electrical control cabinet is equipped with a current monitor for users to observe the working condition of the heating elements at any time.

Oven technical parameters:

Exterior dimensions: 4000 × 1145 × 1920mm (length × width × height)

Working dimensions: 3400 × 500 × 400 mm (length × width × height)

Total power: 16kw

Stainless steel mesh belt width: 350mm

Heating section length: 2000mm

Cooling section length: 1400mm

Loading section length: 300mm

Discharge section length: 300mm

Operating temperature: normal temperature~250 ℃

Heating method: electric heating

Mesh belt running speed: 60~600mm/min

Transmission motor power: 1.1kw electromagnetic speed regulation continuously variable transmission

Production: 4000-6000 pieces/hour

Working hours: 4-7 hours/day

Material: Internal and External Stainless Steel 304, Inner Thickness 2mm, Outer Thickness 1.5mm

Equipment operating voltage: 380V+neutral wire+ground wire

Temperature control accuracy:+1-2 ℃

Equipment Introduction:

This machine isBear bile powder filling production lineThe host in our company is a professional filling and capping machine for penicillin bottle powder, independently developed by our company. This machine adopts a high-precision enclosed cam indexing station, which has high precision, reliable operation, and long service life. The divider has a simple structure and does not require maintenance for long-term use.

This machine is mainly suitable for various powder filling and capping processes,Such as penicillin powder, collagen powder, leech powder, bezoar powder, lingzhi powder, toad powder, bear bile powder, fine powder of traditional Chinese medicine decoction pieces, ice boron powder, pesticide powder, pepper powder, etcWidely used in industries such as food, pharmaceuticals, daily chemical products, and scientific research fields. This machine can be used for standalone production, as well as linked production lines with equipment such as bottle washing machines, drying machines, labeling machines, etc. *Compliant with national GMP requirements.

Features:

1. Human machine interface setting, intuitive and convenient operation, PLC control, precise loading.

2. Variable frequency control, adjustable production speed, and automatic counting.

3. Automatic shutdown function, no filling without bottles.

4. Disk positioning filling, stable and reliable.

5. High precision cam indexing control, precise positioning.

6. Made of SUS304 and 316L stainless steel, * in compliance with GMP requirements.

Main technical parameters:

equipmentIntroduction：

The vertical self-adhesive labeling machine belongs to the new generation of series equipment. It is specially designed and manufactured according to the process and technical requirements of the automatic labeling machine. It can make the adhesive paper on the surface of the bottle flat and beautiful. The labeling process is stable and reliable, and the labeling position meets the ideal requirements. And it has an automatic coding function.

The vertical self-adhesive labeling machine is an electromechanical integrated product with a simple and reasonable structure. This machine can automatically roll and stick adhesive labels on the bottle body in a low and flat manner. In case of missing bottles, the control system of the machine can ensure that the label paper is not sent out, effectively preventing the waste of label paper. It can also adjust the production capacity infinitely according to the specifications and characteristics of the bottle and label paper.

Choosing this labeling machine has strong adaptability to bottles. For various specifications of circular bottles such as food, medicine, cosmetics, etc., whether using transparent or opaque bottles for adhesive labeling, satisfactory labeling can be applied to the bottles.

Technical Specifications：

1). Paper roll specifications: Use adhesive label rolls with a diameter of ≤ 300 millimeters, a roll width of 70 millimeters, and a roll aperture of 76 millimeters.

2). Standard paper specifications: Width ranging from 25mm to 70mm;

3). Bottle specifications: diameter ranging from 20mm to 100mm;

4). Labeling speed: 180-200 bottles/minute (depending on bottle diameter and label paper length)

5). Power: 2.0kW

6). Weight: 200kg

7). Dimensions: Length x Width x Height (2000 x 1200 x 1500) mm