Boiling dryer

NegotiableUpdate on 01/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Boiling dryer: The granular solid material is fed into the fluidized bed dryer by a feeder. The filtered clean air is heated and sent to the bottom of the fluidized bed by a blower, where it contacts the solid material through a distribution plate, forming fluidization and achieving gas-solid heat and mass exchange. After the material is dried, it is discharged from the discharge port, and the exhaust gas is discharged from the top of the fluidized bed through the cyclone dust collector group and bag filter to recover solid powder and then discharged.

Product Details

Jiangyin Jiayuan Pharmaceutical and Chemical Equipment Company produces various specifications of boiling dryers and can also provide non-standard customization. Please call.

Boiling dryerProduct Overview
Boiling dryer, also known as fluidized bed, after more than 30 years of use and improvement, is increasingly playing an important role in pharmaceuticals, chemicals, food, grain processing and other fields. It consists of an air filter, a fluidized bed main unit, a cyclone separator, a bag filter, a high-pressure centrifugal fan, and an operation console. Due to the different properties of dry materials, when matching dust removal equipment, it can be carried out as needed, and cyclone separators, bag filters, or one of them can be selected simultaneously. Generally speaking, materials with a higher specific gravity only need to choose a cyclone separator. Materials with lighter specific gravity need to be equipped with bag filters and pneumatic feeding devices for selection.

Boiling dryerTechnical Specifications

project technology	dry ability	fan power	wind pressure	air volume	air intake temperature	The biggest consume	Overall dimensions			加料形式
project technology	dry ability	fan power	wind pressure	air volume	air intake temperature	The biggest consume	A型	Type B	Type C	加料形式
XF10	10-15	7.5	5.5×103	1500	60-200	2.0×108	43.53.2	3.53.53	53.53.5	1. Star shaped feeding worker 2. Pneumatic self-propelled conveying
XF20	20-25	7.5	5.8×103	2000	60-200	2.6×108	4.544.2	443.2	644.5
XF30	30-40	15	7.1×103	3850	60-200	5.2×108	544.5	444.2	645
XF50	50-80	30	8.5×103	7000	60-200	1.04×108	54.84.8	44.84.5	64.85

Note: Drying capacity is related to material properties, solid content, and hot air inlet and outlet temperatures. The drying capacity here is measured when the initial moisture content of dried sour plum crystals is 20%, the final moisture content is 5%, and the inlet air temperature is 130 ℃. Attention should be paid when selecting.

Boiling dryerworking principle
Boiling dryer is a device that uses filtered clean air to undergo convective heat exchange through a heat exchanger, causing the air temperature to rise to a certain level and enter the main air distribution system. The air is then distributed through a valve plate and enters the boiling device. The warm material enters the dryer from the feeder, and due to the pressure of the air, the material forms a boiling state inside the dryer. The hot air comes into extensive contact with the material, enhancing the heat and mass transfer process and promoting the evaporation and separation of moisture in the material in a short period of time. This device generally operates under negative pressure. 0.1-6mm， *The particle size is 0.5-3mm.

Boiling dryerprocess flow

Drying operations for pharmaceuticals, chemical raw materials, food, grain processing, and feed. For example, drying and dehumidification of raw material tablet granules, traditional Chinese medicine granules, food and beverage granules, corn germ, feed, plastic resin, citric acid, and other powdered and granular materials. The applicable material size is generally 0.1-6mm, with a particle size of 0.5-3mm.