Bulk density tester Powder resistivity vibrating density meter

Powder resistivity tester for measuring the angle of repose of SCI-1 molecular sieve loose packing density meter adopts a vibration feeding method to reduce the flow resistance of powder and particles caused by the cohesive characteristics of gravity and mutual friction, and promote the natural and uniform filling of powder and particles; More accurate representation of the actual physical characteristics of the product; SCI-1 is an upgraded model of SCI-2, which adds a microcomputer control system that can automatically calculate the values of loose density, bulk density, and tap density, and is equipped with a printer to automatically print the test results, reducing calculation and recording errors caused by human factors and preserving the original test data. This instrument is designed according to the requirements of GB/T6286-1986 Molecular Sieve Bulk Density Determination Method, and is suitable for measuring the loose density, bulk density, and tap density of granular molecular sieves. It is also applicable to measuring other powders and particles with similar characteristics and is compatible with international testing methods. Specific parameters of powder loose packing density vibrating density tester: 1. During vibrating density testing, the amplitude can be adjusted from 1 to 14mm During the compaction density test; The frequency can be set arbitrarily from 0-300 times/min 3. Measuring cylinder specifications: one 100ML/300ML each 4. Vibration frequency: any input from 0-99999 5. Feeding speed: 3-5ml/S. 6. Feeding tank specification: 85 * 45 * 20mm. 7. Measuring container material: stainless steel 8. Power supply: 220V/50HZ