CLT multi tube cyclone dust collector

The CLT multi cylinder cyclone dust collector consists of an intake pipe, an exhaust pipe, a cylindrical body, a conical body, and an ash hopper. The cyclone dust collector has a simple structure, is easy to manufacture, install, and maintain, and has low equipment investment and operating costs. It has been widely used to separate solid and liquid particles from airflow, or to separate solid particles from liquids. Under normal operating conditions, the centrifugal force acting on particles is 5-2500 times that of gravity, so the efficiency of cyclone dust collectors is significantly higher than that of gravity settling chambers. A cyclone dust removal device with a dust removal efficiency of over 90% has been successfully developed based on this principle. Among mechanical dust collectors, cyclone dust collectors are one with high efficiency. It is suitable for the removal of non viscous and non fibrous dust, mostly used to remove particles larger than 5 μ m. The parallel multi tube cyclone dust collector device also has a dust removal efficiency of 80-85% for particles larger than 3 μ m. The cyclone dust collector constructed with special metal or ceramic materials that are resistant to high temperature, wear and corrosion can operate at temperatures up to 1000 ℃ and pressures up to 500 × 105Pa. From the perspectives of technology and economy, the pressure loss control range of a cyclone dust collector is generally 500-2000Pa. Therefore, it belongs to the medium efficiency dust collector and can be used for purifying high-temperature flue gas. It is a widely used dust collector, mainly used for boiler flue gas dust removal, multi-stage dust removal, and pre dust removal. Its main disadvantage is its low removal efficiency for small dust particles (<5 μ m).