Chinese medicine ultrafine crusher: suitable for crushing tough, fibrous, sponge like, high oil content, and high sugar content materials that are difficult to crush with general crushers. It also has excellent crushing effects on hard and brittle materials.
Characteristics of Chinese medicine ultrafine grinder:
Suitable for crushing tough, fibrous, sponge like, high oil content, and high sugar content materials that are difficult to crush with general crushers, and also have excellent crushing effects on hard and brittle materials.
Suitable for breaking and crushing plant pollen spores, with a breaking rate of up to 95%.
Suitable for dry and wet crushing, precision mixing, and coating modification operations.
Suitable for material crushing operations with a median diameter of micrometers.
The equipment is easy to load and unload, clean, and suitable for material exchange operations.
The crushing process is fully sealed, with no dust spillage or environmental pollution.
The crushing chamber is equipped with a cooling water jacket, which can adjust the temperature and flow rate of the water to control the temperature of the crushing chamber. A forced cooling system can also be configured to crush materials in an environment of -30 ℃ -0 ℃.
The crushing process can be carried out in an inert atmosphere to prevent explosion and oxidation.
The overall design is reasonable, the amplitude is adjustable, and there is a set operating time for easy operation.
The equipment is easy to maintain and has extremely low operating costs.
Function of Chinese medicine ultrafine grinder:
1. Improve bioavailability. Any crushing operation can crush the cells of traditional Chinese medicine to a certain extent, but the rough crushing operation has a low cell wall breaking rate, and the larger the particle size of the powder compared to the cell diameter,
The lower the wall breaking rate. After the cell breaks through the wall, the contents of the broken cell can directly come into contact with the solvent, and its active ingredients can all enter the solvent directly and be absorbed by the human body
Most of the cells in broken granules and decoction pieces are intact, with particles consisting of several, dozens, or even more cells. The dissolution of active ingredients in cells requires passing through several or even dozens of channels
Cells can enter the solvent and then be absorbed by the human body. And a considerable portion of cellular components cannot pass through the cell wall into the solvent, so this part can only be thrown away for nothing. Therefore, fine
The effective ingredient release amount and release rate of cellular level micro powder traditional Chinese medicine will be higher than that of traditional Chinese medicine powder obtained by ordinary crushing methods in terms of the amount of effective ingredients absorbed by the human body within a certain unit of time,
The types of active ingredients released by it are also more diverse than those produced by ordinary crushing methods. The onset time of drugs will be significantly shortened, and the effects of drugs on the human body will be more comprehensive and stronger.
2. The homogenization effect in compound grinding. Most traditional Chinese medicines are compound formulas, which are composed of various medicinal herbs. After the cell wall is broken, the water and oil inside the cell migrate out, causing the surface of the particles to appear
In a semi moist state, stable particle clusters (also known as microparticles) are formed between particles, each containing the same proportion of traditional Chinese medicine ingredients. This particle cluster
The physical structure of the component varies with different combinations and interactions of HLB values (hydrophilic, lipophilic equilibrium values), ductility, fragmentation, water (oil) content, specific gravity, and other factors of each component in the composition
Used differently. This structure will homogenize the active ingredients of traditional Chinese medicine, allowing them to be evenly absorbed by the human body, which can also enhance the effectiveness of the drug.
3. Improve the industrial extraction rate of active ingredients. Due to the high cell wall breaking rate and reduced dissolution resistance, the use of cell level micro powder in the traditional Chinese medicine industry for extracting active ingredients will significantly improve
High extraction rate. Someone has conducted an extraction experiment of sarsapogenin from Anemarrhena asphodeloides, and under simplified industrial operating conditions, the extraction rate increased by 22.5%. Improving the extraction rate of macromolecular components
More obvious.
4. Reduce the sensation of oral granules. Chocolate research shows that the average particle size of the material is around 25 μ m, and most of the particles have a particle size between 15-20 μ m, which makes it very delicious to eat
The delicate taste characteristics of Huarun can be clearly felt rough when the average particle size exceeds 40 μ m. The average particle size of traditional Chinese medicine compound after cell level crushing operation is generally below 20 μ m,
More than 75% of the particles are finer than 20 μ m, and their particle size is below the threshold for oral particle sensation, so there is no roughness when taken.
5. Additional effects. Since it is a cell level pulverization, the eggs that are equivalent in size to the cell level will also be killed. Thus reducing the threat of pests to traditional Chinese medicine.
| Chinese medicine ultrafine grinderTechnical Indicators: |
| Device Model | Dxft- 6 | Dxft- 12 | Dxft- 30 | Dxft- 50 | Dxft- 100 | Dxft- 200 | | Chamber volume | 3L | 12L | 30L | 50L | 100L | 200L | | Loading quantity | 0.6L | 2.6L | 5L | 10L | 20L | 40L | | power supply voltage | 220V | Three phase 380V | Three phase 380V | Three phase 380V | Three phase 380V | Three phase 380V | | Motor power | 1.1KW | 2.2KW | 5.5KW | 7.5KW | 15KW | 7.5KW | |
| DXFT-50 Grinding Example (Partial) |
| Raw material name | Raw material particle size | Crushing method | Crushing time | Product granularity | output | | Ganoderma | slice | dry-type | 15 minutes | -400 mesh 95% | 8Kg/h | | Ganoderma spore powder | -8um | dry-type | 25 minutes | -破壁率≥95% | 7Kg/h | | deer antler velvet | -2mm | dry-type | 30 minutes | -325 mesh | 2kg | | deer penis | -10mm | dry-type | 30 minutes | -325 mesh | 1kg | | tea | original leaf | dry-type | 10 minutes | -500 mesh 95% | 30Kg/h | | pseudoginseng | slice | dry-type | 15 minutes | -350 mesh 96% | 18g/h | | Extract traditional Chinese medicine | -25mm | dry-type | 3 minutes | -800 mesh 95% | 40Kg/h | | Artificial bezoar | -10mm | dry-type | 15 minutes | -400 mesh 95% | 20Kg/h | | Sun dried ginseng | -6mm | dry-type | 15 minutes | -350 mesh 95% | 20Kg/h | | silk | filament | dry-type | 15 minutes | -300 mesh 96% | 2kg/h | | pearl | -2mm | Ditto. | 15 minutes | -300 mesh | 25kg/h | | | -2mm | Ditto. | 15 minutes | -200 mesh | 7kg/h | | kudzu root | -2mm | Ditto. | 14 minutes | -300 mesh | 15kg/h | | Pay the film | -1mm | Ditto. | 6 minutes | -200 mesh | 25kg/h | | Bazhen Pill | -10 eyes | Ditto. | 25 minutes | -400 mesh 98% | 15kg/h | | Guifu Dihuang | -10 eyes | Ditto. | 12 minutes | -300 mesh 97% | 16kg/h | | Shark cartilage | -5mm | Ditto. | 12 minutes | -200 mesh 97% | 0.8kg/h | | * | -5mm | Ditto. | 5 minutes | 3um | 10kg/h | | antler | -1mm | Ditto. | 15 minutes | -150 mesh | 0.8kg/h | | Nimodipine | -2mm | Ditto. | 2.5 minutes | -3um90% | 8kg/h | | Terfenadine | -2mm | Ditto. | 3 minutes | -5um95% | 8kg/h | | Tianmen Winter | -10 eyes | Ditto. | 15 minutes | -200 mesh 95% | 12kg/h | | Gastrodia Elata | -20 eyes | Ditto. | continuous | -300 mesh | 40kg/h | | Whole turtle | -20 eyes | Ditto. | continuous | -200 mesh | 30kg/h | | cinnamon | -1mm | Ditto. | continuous | -200 mesh | 25kg/h | | xylitol | -2mm | Ditto. | continuous | -325 mesh | 300kg/h | | coffee | 40 eyes | dry-type | 15 minutes | -325 mesh | 8kg/h | Note: 1. The output, product particle size, crushing time, and humidity of the raw materials are directly related. 2. Due to differences in the origin and quality of raw materials, there will be variations in the crushing effect. Performance Comparison Table of Red Flower Ultra fine Crusher | Material Adaptability | | Airflow crusher | Rotary crusher | ball mill | DXF series traditional Chinese medicine grinder | | Fiber material (Silk) | must not | must not | difficult | can | | Resilient materials (Lingzhi) | must not | must not | difficult | good | | Viscous material (Shu Di) | must not | must not | can | good | | Brittle material (*) | good | difficult | Easy | good | | Volatile loss | | Almost total loss | Significant losses | tiny | tiny | | fineness | Fibrous material (300 mesh) | difficult | difficult | difficult | Easy | | Resilient materials (300 mesh) | difficult | difficult | difficult | Easy | | Brittle material (-3μm) | Easy to do | impossible | can | Easy | | efficiency | Fibrous material (300 mesh) | low | low | extremely low | high | | Resilient materials (300 mesh) | low | low | extremely low | high | | Brittle material (-3μm) | high | impossible | extremely low | high | | Configuration complexity | | high | higher | low | higher | | Easy to operate | | difficult | difficult | Easy | Easy | | Changing varieties is difficult and easy | | difficult | Easy | Easy | Easy | | cleaning and maintenance | | difficult | difficult | Easy | Easy | | Yield adaptability | | batch | A small quantity in bulk | A small quantity in bulk | A small quantity in bulk | | Adaptability to dry and wet crushing | | dry | dry | dry and wet | dry and wet | | Crushing temperature | | lower | higher | lower | low | | equipment cost | | high | higher | low | higher | | operating cost | | high | higher | high | lower | | noise | | larger | larger | low | Larger (noise isolating) | | dust (Without dust removal equipment) | | low | big | low | Very low | | Remaining medicinal residue | | have | many | have | none | | Mixed energy (Reconsidered high-precision mixing of drugs) | | lack | lack | can | good | | Wrapping function | | none | none | can | good | | Sealing (moisture resistance) | | Non sealed | Non sealed | enclosed | enclosed | | Cell wall breaking rate (Spores, pollen) | | low | Extremely low and difficult | Extremely low and difficult | High and easy | |