DPH250G aluminum-plastic blister packaging machine

Small aluminum-plastic blister packaging machine,DPH250G aluminum-plastic blister packaging machineProduct Features

1. Integrating light, machinery, electricity, and gas, controlled by a PLC system.

2. Infinite frequency conversion speed regulation, with a high-speed range of 40-180 times per minute.

3. No middle vertical or horizontal edge waste, saving over 200000 yuan in materials annually, and reducing the number of administrators by arranging and sending out plates.

4. The photoelectric control sheet releases the appropriate amount (Japanese optical fiber, Japanese god vision), so that the sheet does not stretch after being heated.

5. Servo motor control, the size of the board does not need to be adjusted, it can be set directly.

6. Can be used in conjunction with general feeding and disc feeding.

7. Plate forming, roller sealing, high packaging efficiency.

DPH250G aluminum-plastic blister packaging machineTechnical Specifications:

Punching efficiency: 20-180 times/minute

Maximum molding area: 200x250mm

PVC：250x（0.15-0.45）mm

PTP：250x（0.02-0.03）mm

Power supply and output: 7.5KW

Overall dimensions: 2700x1000x1750mm

Packaging size: 3500x1160x1690mm

Whole machine weight: 1500Kg

400 boards per minute saves 200000 yuan in packaging materials annually!

Roller plate aluminum-plastic packaging machine, fast aluminum-plastic blister packaging machine, pharmaceutical aluminum-plastic packaging machine

Small aluminum-plastic blister packaging machineVarious malfunctions may occur during long-term use, and timely and effective maintenance is the key to ensuring stable operation and smooth production of the equipment. Here are some common faults and their repair methods:

1、 Poor heat sealing

Cause analysis:

The temperature is too low or the time is too short, which causes the aluminum-plastic composite material to fail to melt and affects the sealing quality.

Uneven heat sealing temperature may be caused by damage to the heating element or uneven surface of the heat sealing plate.

Repair method:

Adjust the heat sealing temperature and time to ensure that the material can fully melt.

Check the heating element and heat sealing plate, replace damaged parts if necessary, and ensure that the surface of the heat sealing plate is flat.

2、 Material offset or folding

Cause analysis:

Improper material transportation may be due to belt wear or uneven tension.

Improper mechanical adjustment, such as failure to adjust the centering mechanism properly, can result in material position deviation.

Repair method:

Check and adjust the conveyor belt to ensure even tension and no wear.

Adjust the alignment mechanism again to ensure that the materials can be correctly aligned.

3、 Packaging material breakage or stretching

Cause analysis:

The speed of the conveying system is too fast, causing the material to stretch or break.

Quality issues with the material itself, such as insufficient elasticity or existing damage.

Repair method:

Adjust the conveying speed to match the packaging speed.

Check the quality of materials and replace them with qualified packaging materials if necessary.

4、 Electronic control malfunction

Cause analysis:

The control system parameter settings are incorrect, resulting in abnormal equipment operation.

Electronic component damage, such as sensor malfunction or circuit board issues.

Repair method:

Check and reset the control system parameters to ensure their correctness.

Check electronic components and replace damaged sensors or circuit boards if necessary.

5、 Noise or abnormal vibration

Cause analysis:

Wear or looseness of mechanical parts can cause noise or vibration during equipment operation.

The lack of lubrication in the bearings results in unstable operation.

Repair method:

Check and tighten all mechanical parts, and replace worn parts if necessary.

Regularly lubricate bearings and transmission components to ensure smooth operation.

6、 Summary and Suggestions

Preventive maintenance: Regularly inspect and maintain equipment, promptly identify and resolve minor issues, and avoid major malfunctions.

Operation training: Ensure that operators are familiar with the operating procedures and maintenance knowledge of the equipment to avoid malfunctions caused by improper operation.

Use qualified materials: Use qualified aluminum-plastic composite materials to avoid packaging quality issues caused by material problems.

Contact professional maintenance: For complex or unsolvable faults, it is necessary to promptly contact professional maintenance personnel or manufacturer's technical support.