Density meter for powder metallurgy structural components

NegotiableUpdate on 05/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Powder metallurgy structural component densitometer, powder metallurgy sintering densitometer, powder metallurgy densitometer, powder metallurgy densitometer, powder metallurgy raw material densitometer, powder metallurgy structural component densitometer, powder metallurgy sintering densitometer principle: according to ASTMB311 and B328; MPIF42、57； JISZ2505、Z2506、GB/T5163。 Suitable for boiling method and vacuum saturation method measurement, using Archimedes principle buoyancy method to accurately read measurement values. We provide high-precision measuring instruments of 0.1mg and 0.01mg for small samples. Please feel free to inquire! TW-120P function: 1. Directly read the bulk density, effective porosity, wet density, and volume of structural components. 2. Directly read the oil content and effective porosity of sintered oil containing bearings. 3. Directly read the specific gravity and volume of non absorbent materials according to on-site operating habits. 4. Adopt a large water tank design to reduce errors caused by buoyancy of the suspension rail line. TW-300P/600P Function: 1. Directly read the density of structural components and the effective porosity, wet density, and volume of oil containing alloys 2: Directly reading the oil content and effective porosity of sintered oil bearing: 3. Adopting a large water tank design to reduce the error caused by the buoyancy of the suspension rail line. Powder metallurgy structural component densitometer, powder metallurgy sintering densitometer TW-120P/300P Specification: Model TW-120P TW-300P TW-600P Weighing range 0.001g-120g 0.01g-300g 0.01-600g Density analysis: 0.0001g/cm

Product Details

Product Introduction

Density meter for powder metallurgy structural componentsPowder metallurgy sintering densitometer, powder metallurgy densitometer, powder metallurgy density tester, powder metallurgy raw material densitometer, powder metallurgy structural component densitometer, powder metallurgy sintering densitometer
Principle: According to ASTM B311 and B328; MPIF 42、57； JIS Z2505、Z2506、GB/T5163。 Suitable for boiling method and vacuum saturation method measurement, using Archimedes principle buoyancy method to accurately read measurement values.
※ We provide high-precision measuring instruments of 0.1mg and 0.01mg for small samples. Please feel free to inquire!
TW-120PFunction:
1. Directly read the bulk density, effective porosity, wet density, and volume of structural components
2. Directly read the oil content and effective porosity of sintered oil containing bearings
3. Read the specific gravity and volume of non absorbent materials directly according to on-site operating habits
4. Adopting a large water tank design to reduce the error caused by the buoyancy of the suspension line. .
TW-300P/600P Function:
1: Directly read the density of structural components and the effective porosity, wet density, and volume of oil containing alloys
2: Directly read the oil content and effective porosity of sintered oil containing bearings
3: Adopting a large water tank design to reduce the error caused by the buoyancy of the suspension line.
Density meter for powder metallurgy structural componentsPowder metallurgy sintering density meter TW-120P/300P specifications:
Model TW-120P TW-300P TW-600P
Weighing range: 0.001g-120g, 0.01g-300g, 0.01-600g
Density analysis: 0.0001g/cm3, 0.001 g/cm3
Measurement time: approximately 10 seconds
Settings: Temperature compensation setting, solution compensation setting, density setting for waterproof treatment oil
Standard interface: RS-232
To learn more information,Please log in to our websitehttp://www.xfyiqi.com Or call for consultation:Kang Yulin0592-518-7269 187-5927-8268 QQ：958-747-345