Dual Power Nano Sand Grinding Machine Research Special Nano Sand Grinding Machine Laboratory

NegotiableUpdate on 02/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

coating

Product Details

Product Introduction:

The dual power nano sand grinder series represents the advanced wet mechanical nano grinding technology currently available.It is one of the few machines with stable mass production in the field of ultrafine and nano materials. The machine has good grinding performance, high output, low energy consumption, and stabilityQualitative high.

Product features:

1. The centrifugal separation system can use 0.03mm grinding beads and is suitable for ultrafine grinding below 100nm

2. New separation structure design overcomes the problem of leaking grinding balls in centrifugal separation systems

3. No sun screen separation system, never blocking the machine

4. Rod pin grinding structure, high grinding efficiency, no dead corners, more uniform particle size distribution

5. Imported sealing technology, safe and reliable, adding the same type of solvent as the material to prevent material loss due to leakage

6. Pressure and temperature automatic protection device, safer to use

7. Multiple material options for internal structure to meet different material requirements.

working principle:
Designed using the principle of (net free) centrifugal separation, centrifugal separation has an independent power motor. During machine operation, most of the grinding zirconium balls are distributed around the grinding chamber and move in the same direction as the object due to the centrifugal force of the disperser. A small amount of zirconium balls and materials rotate around the separator. When the separator rotates at high speed, the centrifugal force generated by the zirconium balls is greater than the pressure generated by the pump on the zirconium balls in the chamber, causing the zirconium beads to stay in the grinding chamber. At the same time, when the separator rotates at high speed, the centrifugal force generated by the material is less than the pressure generated by the pump on the material in the chamber, forcing the material to flow out of the separator.

Application areas:

Application: Lithium iron phosphate battery positive and negative electrode materials, digital inkjet ink, alumina, zirconia, silicon carbide, titanium dioxide, calcium carbonate, iron oxide, yttrium oxide, indium, cerium, pearl powder, pharmaceutical preparations, offset printing ink, screen printing ink, concentrated ink, ultraviolet printing ink, concentrated ink, ultraviolet printing ink, gravure printing ink, rubber relief printing ink, water-based printing, ink. Automotive coatings, coil steel coatings, anti-corrosion coatings, wood coatings, screen printing inks, plastic solvent inks, textile pigments, water-based printing pastes, electronic industry pastes, latex paints, carbon black, titanium dioxide, water-based wood coatings, solvent based wood coatings, pesticide suspensions, latex paints, sulfur, zinc oxide, gravure inks, flexographic inks, papermaking, calcium carbonate, fillers, car paints and car repair paints, special inks, water-based printing pastes, carbon black paste textile pigments, submicron grinding, electronic industry pastes, ship paints, electrophoretic paints, metal paints, coil steel paints, water-based wood coatings, solvent based wood coatings, pesticide suspensions, latex paints, sulfur, zinc oxide, gravure Ink, flexographic ink, papermaking, calcium carbonate, fillers, leather.

Product parameters:

Discharge particle size: ＜ 100nm

Solvent type: water-based, oil-based

Viscosity requirement: ＜ 3500CPS

Medium size: 0.03-1.0mm

Rotor rod pin structure: zirconia, silicon carbide ceramic, tungsten carbide, hard alloy, polyurethane, polymer, etc

Grinding chamber structure: zirconia, silicon carbide ceramics, tungsten carbide, hard alloys, polyurethane, polymers, etc

model	Volume (L)	Grinding power (KW)/ Centrifugal separation motor power (KW)	Processing Batch (L)	Medium size (mm)	Weight (Kg)	Dimensions (mm)
STNSD1	1	4	3-30	0.03-1.0	200	530x470x625
STNSD2	2	7.5/4	5-50	0.03-1.0	500	980x750x1550
STNSD10	10	22/7.5	30-200	0.03-1.0	1800	2200x1100x1500
STNSD30	30	45/11	60-500	0.03-1.0	2100	2300x1200x1700
STNSD60	60	75 90/18.5	150-1000	0.03-1.0	3600	2600x1400x1900
STNSD150	150	185/30	300-3000	0.03-1.0	7500	3200x1600x2100