-
E-mail
hlbzhjx@126.com
-
Phone
13601953445
-
Address
9232 Humin Road, Xuhui District, Shanghai
Product Categories
- Automatic winding film machine
- Liquid packaging machine
- External vacuum packaging machine
- High platform packaging and bundling machine
- Single chamber vacuum packaging machine
- sealing machine
- Vertical self-adhesive labeling machine
- Automatic double-sided labeling machine
- Manual hot melt packaging and bundling machine
- Shrink packaging machine
- Paste filling machine
Shanghai Hualin Packaging Machinery Co., Ltd
Efficient floor mounted paste filling machine
NegotiableUpdate on 01/05
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Efficient floor standing paste filling machine $n The floor standing paste filling machine is a dual-use filling equipment for liquids, pastes, and sauces with particles in industries such as medicine, daily chemical, food, and processing. Its filling volume can be adjusted arbitrarily, the action is reliable, and the measurement is accurate.
Product Details
Efficient floor mounted paste filling machine
| Floor standing paste filling machineIt is a dual-use filling equipment for liquids, pastes, and sauces with granules in industries such as medicine, daily chemical, food, and processing. Its filling volume can be adjusted arbitrarily, the action is reliable, and the measurement is accurate.
Technical Specifications:
|
Floor standing paste filling machineInstallation and debugging
1. After opening the box, install the machine according to the "Installation Diagram" and connect the compressed air source with a pressure of 0.6MPa. If connecting to the compressed air main pipeline, valves should be installed first.
2. Open the right door and unscrew the oil mist gauge to add clean engine oil or sewing machine oil. Note: do not add oil with air pressure, and the oil level should be about 8% full.
3. Check if there is any air leakage on each sealing surface by introducing the air source. Adjust the air pressure to 0.3~0.4MPa and adjust the oil intake. Generally, after several actions, spray a drop of oil. Regularly check the fuel injection situation.
4. Filling volume adjustment: First, rotate the filling volume adjustment handwheel and observe the scale on the indicator window to achieve the desired filling volume. At the same time, adjust the suction and discharge speeds to achieve satisfactory filling results. Measure the filling volume using a quantity gauge, and then adjust the filling volume accordingly.
Cleaning requirements
Before operation, it is necessary to thoroughly clean, using a non-woven soft cloth and cleaning agent to wipe away oil or dirt, and then dry with a non-woven soft cloth. According to GMP requirements, check whether the contact area between equipment and materials meets the corresponding cleanliness requirements. If it does not meet the requirements, clean and dry it again. The cleaning method is based on the process requirements.
Operation and maintenance
1. The filling action of this machine is divided into automatic and manual modes. When the machine is manual, simply push the tongue with the bottle mouth to start suction. Be careful not to hold the tongue during filling. When using automatic mode, bottles must be placed under the discharge port first. Once the switch is turned to automatic mode, filling will begin immediately and bottles will be replaced in a timely manner.
2. When unstable measurement is found during filling, it should be checked that there may be debris trapped in the feed check valve, resulting in poor sealing and affecting the filling volume.
3. The leakage of material at the lower part of the cylinder indicates that the piston sealing ring is worn and needs to be replaced.
Efficient floor mounted paste filling machine
Similar Product Recommend
