Welcome Customer !

Membership

Help

Xiamen Xiongfa Instrument Co., Ltd
Custom manufacturer

Main Products:

pharmamach>Products

Xiamen Xiongfa Instrument Co., Ltd

  • E-mail

    958747345@qq.com

  • Phone

  • Address

    No. 28 General Temple, Siming District, Xiamen City

Contact Now

Ethylene tetrafluoroethylene fluoroplastic bulk density meter

NegotiableUpdate on 05/24
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

ETFEHT-2183 Ethylene Tetrafluoroethylene Fluoroplastics Bulk Density Meter DuPont Fluoropolymers

Product Details

Product Introduction

ETFE HT-2183Ethylene tetrafluoroethylene Fluoroplastic Bulk Density MeterDuPontFluoropolymers

Performance characteristicstallESCR(Stress crack resistance)Impact resistance, goodGood weather resistance performanceAnti solubilityGood chemical resistanceHydrolytic stability•AbrasionResistantLiners •electrical/Electronic application field

fastenerpurposepumping elementElectrical wire insulation materialfilmvalve/Valve componentsParts deviceliningPipeline appearanceTranslucent form Granular materialprocessingBlow MoldingResin transfer moldinginjectionsqueeze out

compression molding

Physical performance rating unit systemtest methodproportion1.70g/cm3 ASTMD792

Apparent density1.30g/cm3 ASTMD1895Melting rate(297°C/5.0kg)6.0g/10min

ASTMD1238

Water absorption rate(24hr) 0.0070% ASTMD570

Technical parameters:ASTM D1895Plastic apparent density meterCompliant with standards: Based onASTM

D1895 03 Standard Test Methods for Apparent Density, Bulk Factor, and

1Pourability of Plastic Materials 1Apparatus for Apparent Density Test, Method B

2make.Technical parameters:The height of the measuring cup

324±0.1cmHeight of funnel and measuring cup3.8cm

4Outlet under funnel2.54cm

5±0.16cmOpening on the funnel

612.7±1.0cm246The capacity of the measuring cup

7490ml±2.0ml1Angle:Degree;1Material: Stainless steel material;Configure attachments:stopwatchonly 1;

brushonly

;steel ruler

15cmgraspXF-1895AApparent density testerASTM D1895

Plastic apparent density meter

1Compliant with standards: Based onASTMD1895 03 Standard Test Methods for Apparent Density, Bulk Factor, and

2Pourability of Plastic Materials 1Apparatus for Apparent Density Test, Method A

3make.Technical parameters:The height of the measuring cup7.98±0.1cm

4Height of funnel and measuring cup3.8cm

5Outlet under funnel0.95cm

6±0.08cm304

7Opening on the funnel19.3cmThe capacity of the measuring cup1100ml±2.0mlMaterial:Stainless steel material; 1Configure attachments:

stopwatchonly;brush only;steel ruler15cmgrasp