FR-900 vertical automatic plastic film sealing machine is suitable for packaging and sealing liquid or powder items in aluminum foil bags, plastic bags, composite bags, and other industries such as medicine, pesticides, food, daily chemicals, lubricants, etc.
FR-900 vertical automatic plastic film sealing machine uses:
Connect the power supply, and each mechanism starts working. After the electric heating element is powered on, it heats up rapidly, causing the upper and lower heating blocks to rise in temperature and adjust to the desired temperature through the temperature control system. The printing wheel rotates, and the cooling system starts cooling as needed. The conveyor belt rotates and is adjusted to the desired speed by the speed control device.
The FR-900 vertical automatic plastic film sealing machine has the function of continuous conveying, sealing, and printing in one go, and can be used horizontally or vertically. It adopts an electronic constant temperature control and stepless speed regulation transmission mechanism, and is used for various materials of plastic film.
The main structure and working principle of FR-900 vertical automatic plastic film sealing machine:
1. The machine consists of a frame, a deceleration and speed control transmission mechanism, a heating and cooling mechanism, a sealing and printing mechanism, a conveying device, and an electrical and electronic control system.
2. Connect the power supply, and all mechanisms will start working. After the electric heating element is powered on, it heats up rapidly to raise the temperature of the upper and lower heating blocks, and the control system adjusts it to the desired temperature; The printing wheel rotates; Start the cooling system as needed; The conveyor belt rotates and is adjusted to the desired speed by the speed control device.
Operating Procedures for FR-900 Vertical Automatic Plastic Film Sealing Machine
1. When dirt is found adhering to the sealing tape and heating block, the machine should be stopped to remove it. Do not remove it directly by hand when the temperature is too high.
2. To improve the service life of the sealing tape, it is required to first return the temperature adjustment knob to zero position and turn on the fan before preparing to shut down. At this point, the temperature pointer begins to slowly decrease, and the sealing tape should still be running. After a few minutes, the temperature dropped to 100. Only when the temperature is below C can the fan and main power switch be turned off.