Fully automatic aluminum-plastic packaging machine

workflow

1. Forming (heating up and down)

2. Heat sealing (upper heating)

3. Code it

4. Indentation (with trace heating)

5. Cutting knife

6. Forming and outputting finished products

sample image

Configuration List

Moving parts

electrical components

Fully automatic aluminum-plastic packaging machineOperation instructions

Before operation, carefully read the equipment manual to understand its performance, structure, operating methods, and precautions.

Check if the equipment is in good condition, if all components are functioning properly, and if the power cord is securely connected.

Choose the appropriate mold based on the shape and size of the packaged item. Install the mold onto the equipment and adjust its position.

Turn on the power switch of the device, set the packaging parameters (such as packaging speed, sealing temperature, etc.), and then press the start button to start the device.

During the operation of the equipment, the working status of the equipment should be observed at all times, and if there are any abnormal situations, the machine should be stopped immediately for handling.

After the equipment completes a packaging task, any residue inside the equipment should be promptly cleaned to maintain its cleanliness.

When the device is not in use for a long time, the power switch should be turned off, the power plug should be unplugged, and the device should be stored in a dry, cool place.

Maintenance Notice

Regularly inspect the various components of the equipment, such as chains, bearings, gears, etc., and replace them promptly if wear or damage is found.

Inspect the electrical components of the equipment, such as wires, sockets, switches, etc., to ensure that they are intact and undamaged.

Inspect the heating components of the equipment, such as heating plates and thermocouples, to ensure their proper functioning.

Inspect the transmission components of the equipment, such as chains, gears, etc., to ensure they are smooth and unobstructed.

Check the control system of the equipment, such as touch screen, PLC, etc., to ensure its normal operation.

Inspect the pneumatic components of the equipment, such as cylinders and valves, to ensure their proper functioning.

Inspect the hydraulic components of the equipment, such as oil cylinders, oil pumps, etc., to ensure their normal operation.

Check the lubrication system of the equipment, such as lubricating oil, grease, etc., to ensure that it is sufficient and of good quality.

Inspect the safety protection devices of the equipment, such as protective covers, safety doors, etc., to ensure their integrity and reliability.

Regularly maintain the equipment, such as cleaning, lubrication, fastening, etc., to ensure its normal operation.

Precautions

When operating, the requirements of the equipment manual should be followed, and unauthorized operation is strictly prohibited.

When maintaining equipment, the power should be disconnected first to ensure that the equipment is in a shutdown state. At the same time, protective equipment such as gloves and masks should be worn to prevent accidental injuries.

When replacing vulnerable parts of equipment, reliable products should be selected to ensure the normal operation of the equipment.

When the equipment malfunctions, it is necessary to promptly contact the equipment manufacturer or professional maintenance personnel for handling, and do not disassemble and repair it on your own.

During the operation of the equipment, attention should be paid to observing the operating status of the equipment. If there are any abnormal situations, the machine should be stopped immediately for handling.