Fully automatic high-speed coating machine

BG150 typeFully automatic high-speed coating machine

1. Coating weight: 150 kilograms (weight after coating), effective volume: 180 liters;

2. The adjustment range of drum speed is 2-17rpm, with a display accuracy of 0.1rpm;

3. Open hole drum, aperture? 3mm；

4. Variable frequency regulation of drum speed, stable, convenient, and reliable speed regulation;

5. The drum and its main internal components are made of 304 stainless steel, which meets the requirements of GMP standards;

6. The host skin and internal ribs are made of 304 stainless steel;

7. The drum is equipped with composite mixing blades, including 2 main mixing blades and 2 auxiliary mixing blades;

8. The inner wall of the drum is polished with a bright finish, Ra≤0.6μM；

9. The outer surface of the host is treated with matte finish, Ra≤0.8μM；

10. Adopting chain transmission and equipped with chain tensioning device;

11. The host is equipped with explosion-proof lighting;

12. The air inlet can be adjusted up and down to meet different coating requirements;

13. Equipped with a set of internal and external feeders, the drum rotates the material forward, and the discharge is rapid and efficient;

14. The exposed corners of the host are treated with rounded corners;

15. The distance and spraying angle between the spray gun and the bed can be adjusted to fully meet the requirements of different situations;

16. The supply and exhaust ducts are equipped with automatic air control devices that can be automatically opened and closed to avoid contamination of the drum by external air;

17. The host has no exposed transmission device, which can effectively avoid personnel injury;

18. The host liquid tank adopts an inclined design, with the drainage outlet located at the low point, which can drain the cleaning water;

19. Equipped with explosion-proof main motor;

20. Equipped with drum anti-static device;

21. The electrical box inside the host adopts positive pressure blowing to avoid the entry of volatile gases and reduce the risk of explosion;

22. The electrical boxes inside the host are equipped with protective covers or covers to effectively prevent electric shock injuries.

BG150 typeFully automatic high-speed coating machine

Technical Specifications:

Cleaning water flow rate: 9t/h

Power supply mode: 380V/3AC/50HZ three-phase five wire system

Power: 13kW (steam heated air supply cabinet, excluding insulation bucket heating)

17kW (steam heated air supply cabinet, including insulation bucket heating)

53kW (electric heating air supply cabinet, including insulation bucket heating)

Required steam quantity: 100kg/H;

Electric heating power of the air supply cabinet (for electric heating) 36KW;

Electric heating power of insulation bucket: 4.5kw (this function is available when equipped with a mixing insulation bucket)

Compressed air pressure: 0.5-0.6Mpa;

Compressed air consumption: 70 m3/h;

Cleaning pump motor power: 2KW

Cleaning water pressure: 0.1-0.2MPa;

1. Coating roller diameter: 1220mm;

   2. Effective volume: 180 liters;

   3. Coating drum speed: 2-17rpm;

   4. Main motor power: 2.2KW;

   5. Exhaust cabinet motor power: 5.5KW;

   6. Exhaust volume of the exhaust cabinet: 3000m3/h;

   Motor power of air supply cabinet: 1.5KW (steam heating);

   Supply air volume of the air cabinet: 1300m3/h;

   Steam pressure of air supply cabinet (for steam heating): 0.25-0.4Mpa;

China Aerospace Manufacturing Technology Research Institute (referred to as AVIC Manufacturing Institute) was founded in July 1957.

There are currently over 2200 employees in the entire institute, including one academician of the Academy of Engineering, more than 60 researchers, and over 300 senior engineers. The entire hospital covers an area of over 340000 square meters, including more than 100000 square meters of scientific research and production facilities. It has over 5000 sets of mechanical processing equipment, testing equipment, and instruments, with a total asset of 1.7 billion yuan.