GXY-2 core drilling rig, exploration drilling rig, water well drilling rig (300-600 meters)

The GXY-2 core drilling rig has advanced design, reasonable layout, compact structure, flexible operation, durability, good disassembly, and is easy to relocate and repair. Mainly used for diamond and alloy drilling of solid mineral deposits on the surface and in tunnels, it can be used for engineering geological exploration and groundwater exploration, shallow petroleum exploration, natural gas exploration, hydrology, water wells, dam injection, tunnel ventilation, drainage drilling and other engineering hole drillingAnd the construction of small drilling machines for grouting pile holes.

The GXY-2 drilling rig is equipped with an automatic centering hydraulic chuck, a planetary winch with strong lifting and pulling capabilities, and a clutch that is easy to operate and reliable to use.

GXY-2Compared with general types of hydraulic drilling machines, Type A drilling machines have the following characteristics:
1.The drilling rig has a high speed and a reasonable speed range, with multiple speed stages and high low-speed torque, suitable for small-diameter diamond core drilling rigs, as well as meeting the requirements of large-diameter hard alloy core drilling and various engineering drilling.
2.The drilling rig is lightweight and has good disassembly. The drilling rig can be disassembled into nine integral components, with the largest component weighing only200Kilogram. Easy to relocate and suitable for working in mountainous areas.
3.The structure is simple and the layout is reasonable, with all components exposed and not overlapping with each other, making it easy to maintain, upkeep, and repair.
4.The drilling rig has two reverse speeds, making it less labor-intensive and safe to handle accidents.
5.The drilling rig moves smoothly and is firmly fixed. The drilling rig frame is sturdy, with a low center of gravity, and has good stability during high-speed drilling.
6.Equipped with sufficient instruments to grasp the situation inside the hole, the control handle is relatively flexible, the layout is reasonable, and the operation is flexible and reliable.
7.The drilling rig and mud pump are driven separately by a single machine, making the airport layout more flexible and reducing the airport area.

·Technical parameters

·Basic parameters

Drilling depth:300 -600 mDrill pipe diameter: Ø42 mm；Ф50 mm
Drilling inclination angle:360 ^o Drilling rig corridor size: (length) * wide* High)2160*950*1800 mm
Drilling rig weight: (Excluding power machines)1100 kg
·Power
Equipped with an electric motor:Y180L-22-4, rotational speed:1470r/min, Power:22KW.
Equipped with diesel engine:4100, power:30KW,rotational speed:2000r/min
·Gyrator
Vertical shaft speed: forward rotation, low speed: 70 ；121 ；190 ；263 r/ min，High speed:329; 570 ; 899 ; 1241 r/ min ;
Reverse low speed:55 r/ min ,high speed:257 r/ min
Vertical axis travel:600 mm,Rated lifting force of vertical shaft:72 KN,Rated vertical pressure:54 KN
Vertical shaft inner diameter: Ø68 mmMaximum vertical torque:2760 N.m
·Winch
Maximum lifting capacity (low-speed single rope):30 KN,
Drum speed:37 ；65 ；103 ；141 r/min
Steel rope lifting speed (single rope, single layer):0.41；0.73 ；1.15 ；1.58 m/ s
Steel rope specification: Ø16 mmWire rope capacity:50 m
·Mobile devices Moving cylinder stroke:465 mmDistance of drilling rig from the hole opening:315 mm

pour:This drilling rig is equipped with a diesel engine or an electric motor for power supply,Should be requested by the user when placing an order.