Product Categories

Taizhou Hengxin Instrument Equipment Co., Ltd

E-mail
Phone
13852617435
Address
2nd Floor, Jiulong Entrepreneurship Incubation Base, Hailing District, Taizhou City

HTY-1A Fully Automatic Karl Fischer Moisture Meter (Capacity Method)

NegotiableUpdate on 05/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Hengteya HTY-1A fully automatic Karl Fischer titration instrument is an automatic analytical instrument that uses Karl Fischer volumetric titration to determine moisture content. This instrument is an ideal moisture detection device for production and scientific research work. Compliant with over 20 national standards including GB6238, GB11146, GB11133, etc

Product Details

Hengteya HTY-1A Fully Automatic Karl Fischer Moisture MeterIt is an automatic analytical instrument that uses Karl Fischer titration to determine moisture content. This instrument is an ideal moisture detection device for production and scientific research work. Compliant with over 20 national standards such as GB6238, GB11146, GB11133, etc.

Hengteya HTY-1A Fully Automatic Karl Fischer Moisture MeterTechnical parameters:

Measurement principle:	Karl Fischer titration method
Screen display:	Four digit LED digital display
Measurement range:	30ppm——100% H₂O
Measurement tube resolution:	0.01ml
Repeatability of water titration:	≤0.01
Linear correlation coefficient of water titration:	≥; zero point nine nine eight
Capacity error:	≤±0.002
Instrument burette capacity:	More than 25ml
Sensitivity:	10^-6A
Titration speed:	automatic control
Closure:	Fully enclosed pipeline design
Usage environment:	Suggested room temperature -40 ℃, humidity&lsaquo; 85%
Power supply:	AC220V±10% 50HZ±2.5HZ
Weight:	About 3 kilograms

Hengteya HTY-1A Fully Automatic Karl Fischer Moisture MeterScope of application:
Suitable for industries such as pharmaceuticals, organic chemicals, inorganic chemicals, petrochemicals, fertilizers, pesticides, dyes, coatings, food and beverage, surfactants, cosmetics, etc.

Hengteya HTY-1A Fully Automatic Karl Fischer Moisture MeterProduct specifications:

1. GB/T 6283-2008 Determination of moisture content in chemical products Karl Fischer method

2. ASTM E1064-2008 Karl Fischer Coulombic Titration for Determination of Water Content in Organic Liquids

3. GB/T 7600-1987 Determination of Moisture Content in Operating Transformer Oil (Coulombic Method)

4. ASTM D4928-00 (2010) Karl Fischer Coulombic Titration for Determination of Water Content in Crude Oil

5. ASTM D6304-2007 Karl Fischer coulometric titration method for determining water content in petroleum products, lubricants, and additives

6. ISO 10337-1997 Determination of Moisture in Crude Oil Karl Fischer Coulombic Titration Method

7. GB/T 11146-2009 Determination of Crude Oil Water Content Karl Fischer Coulombic Titration Method

8. GB/T 3727-2003 Determination of Trace Water in Ethylene and Propylene for Industrial Use

9. GB/T 5074-1985 Method for determination of moisture content in coking products by microcoulometry

10. GB/T 6023-2008 Determination of Trace Water in Butadiene for Industrial Use Karl Fischer Coulombic Method

11. GB/T 7376-2008 Determination of Trace Moisture in Fluoroalkanes for Industrial Use Karl Fischer Method

12. GB/T 18619.1-2002 Determination of Water Content in Natural Gas Karl Fischer Coulombic Method

13. SH/T 0246-1992 Determination of Water Content in Light Petroleum Products (Electricity Method)

14. SH/T 0255-1992 Method for determination of moisture content in additives and lubricating oils containing additives (electric method)

15. ASTM E1064-2008 Karl Fischer Coulombic Titration for Determination of Water Content in Organic Liquids

16. ASTM D4928-00 (2010) Karl Fischer Coulombic Titration for Determination of Water Content in Crude Oil

17. ASTM D6304-2007 Standard for Determination of Water Content in Petroleum Products, Lubricants, and Additives by Karl Fischer Coulombic Titration

Hengteya HTY-1A Fully Automatic Karl Fischer Moisture MeterFunctional features:

① By pressing the relevant function keys, the instrument can achieve: solvent inhalation, measurement, endpoint display (alarm), waste liquid discharge, and stirring;

② The Hengteya HTY-1A fully automatic Karl Fischer moisture analyzer uses a dedicated reagent bottle connector and can use standard pyridine or pyridine free reagents;

③ The Hengteya HTY-1A fully automatic Karl Fischer moisture meter adopts a high brightness digital tube for clear display;

④ Once there is an error in the operation, it can be immediately interrupted and restarted;

⑤ The pipeline system adopts a fully enclosed design to prevent toxic gases from escaping, protect the environment and health, and ensure smooth and noise free operation of the instrument.

⑥ Newly added fast drop function, using electrode polarization voltage to automatically control drop speed, measuring a sample only takes a few tens of seconds;

⑦ Adding an ammeter makes the titration process more intuitive;

⑧ The entire liquid circuit is made of special materials to improve corrosion resistance and ensure long-term continuous operation;

⑨ Use electrode polarization voltage to determine and display the reaction endpoint, and terminate titration;

⑩ Fully enclosed system to prevent the infiltration of environmental moisture; Using ordinary reagent bottle caps as connectors for easy replacement.

Hengteya HTY-1A Fully Automatic Karl Fischer Moisture Meterprecautions：

1、 Cannot display normally

Please check if the power connection wire, fuse, and power switch of the instrument are functioning properly.

2、 The instrument displays iodine

1. Evaluate whether the reagent is over iodine. If so, use a 0.5 microliter sampler to extract 0.2-0.4 microliters of water and inject it. Do not use an injector of 50 microliters or larger for injection.

2. Check whether the platinum wire at the bottom of the measuring electrode is connected together, causing a short circuit.

3、 The instrument shows an open circuit

Check if the measuring electrode is in good contact and re insert it firmly. Check if the connecting wire is broken.

4、 Open electrolysis without counting

Check if the electrolytic electrode is in good contact, unplug and plug it again, and check if the connecting wire is broken.

5、 Electrolysis does not end

Check if the reagent has expired.

Enjoy a one-year free warranty and lifetime maintenance from the date of purchase;
7-day no reason return and exchange, 24-hour instant response;
One on one technical guidance, allowing you to have no worries after purchasing;
National free consultation hotline: 400-8821-087.