HYM-I/O input/output interface

NegotiableUpdate on 05/26

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

HYM-I/O input/output interface, the input terminal can be used to connect to a regular door magnetic switch, providing upward feedback on whether the fire door is closed properly; The output end can be connected to an electromagnetic release device (or electromagnetic door magnet) to control the release of power (power off) downwards, causing the normally open door to close. The input/output interface requires a low-voltage power supply box to provide 24V DC regulated current, using a two bus non-polar design to transmit data to the fire door monitor.

Product Details

Technical Parameter

Communication method	TBUS two bus communication (power+signal)
working voltage	DC24V
Input signal	Two sets of passive switch signals
output signal	Two sets of active normally open signals and two sets of active normally closed signals
Installation method	Standard 86 * 86 pre embedded box installation
Adaptive controller	HYFD-B
Usage environment	Temperature: -10℃--＋55℃
	Humidity: 15% RH~95% RH (45℃）
	Pressure range 86Kpa~106Kpa

Detail drawing

输入输出接口

Outline dimension diagram

matching products

输入输出接口

The HYM-PW low-voltage power box is wall mounted and used to provide power supply for input and output modules.

•INPUT VOLTAGEAC220V/50Hz， Output voltage DC28V;

•According to the project scale, optional3.5A, 10A output current, model HYM-PW/3.5A (10A);

•Installation method: Wall mounted.