High power lifting brushless mixer

The high-power lifting brushless mixer adopts a low-voltage servo motor, which is suitable for the pilot mixing of low to medium viscosity liquids in the laboratory. Button based control makes experimental operations more convenient; The stirring speed can be infinitely adjusted to meet the requirement of adjusting the stirring speed at any time during the experiment; Run timed control to ensure effective and controllable timing of the experiment. Stable stirring speed, capable of stirring low to medium viscosity media and slurries.

High power lifting brushless mixer

1、 Product Overview

High power lifting brushless mixeradoptlow pressureServo motor, suitable for pilot mixing of low to medium viscosity liquids in the laboratory.buttonStyle control makes experimental operations more convenient; The stirring speed can be infinitely adjusted to meet the requirement of adjusting the stirring speed at any time during the experiment; Run timed control to ensure effective and controllable timing of the experiment. Stable stirring speed, competentLow to mediumMixing of viscous media and slurries.

2、 Technical parameters

rated voltage：AC 220 V Rated frequencyrate ：50/60 HZ

Motor power： 1500 W Drive Type ： brushless motor

work system： S1(evencontinue) Speed adjustment range： 1～2000 rpm

Column lifting stroke：50 cm Mixing rod fixing method： Quick transfer chuck

Clamping range of rotary chuck： Φ3～16 mm processing capacity(H2O)：200 L

Timed control range： 1～9999min

IIIEquipment installation

1. Move the machine smoothly from the packaging box to the ground, then pull up the four movable caster stop plates on the machine base, release the stops, and move the machine to the desired working position，Then step down the stop plates on the four casters.

2. This machine can adjust the position of the driving host forward, backward, up, and down according to the mixing requirements.

3. Use the randomly attached special wrench to open the mixing rod clamp and install the mixing blade.

3. Due to different experimental applications, this machine is only provided as standard equipmentThree bladed propeller typeThe stirring rod. But in order to meet the needs of experimental applications, our company offers various types of stirring rods for selection.

4Operation and Maintenance

1. This machine uses a power socketfor220V The10A Three hole socket. Before use, check if the plugs on the power input and output sockets are securely plugged in.

2.Settings: Plug in the power supply, turn on the power switch, and long press the Kunlun power on screen to enter the settings interface. Otherwise, it will enter the monitoring interface by default to check the servo status and speed settings. After the motor is powered off, the speed and enable need to be reset. Otherwise, it will not be able to operate. Enter the desired speed in the speed input box and click the speed setting button to complete the setting. Timing control function: The timing unit is seconds. Set the time in the timing input box and click the button to start timing. If the timing is not up, you can cancel the timing control at any time. After cancellation, you need to reset the time.

3After setting it up,The mixing host operation test should be conducted first, and the mixing rod should not be installed during the test. If high-speed stirring is required during the experiment, the mixing rod used must have high requirements for straightness and rigidity.

4、The column lifting of this machineKey control, adjustable screw extension and screw retraction.

5. After the machine is running, please turn off the power switch and unplug itgo outAC220V The power plug. And clean the mixing rod in a timely manner for future use.

6. This machine must be regularly maintained. If it needs to be stopped for a long time, please place it in a ventilated and dry place to prevent electronic components from getting damp. If reused, the host should be allowed to idle slowly for a period of time to allow moisture on the electronic components to dissipate.

7. If the machine encounters any issues during operationfaultIf it is not running, the mixing rod should be removed first, and then the power socket should be checked for power supply, loose connectors, and good contact. If the above faults are eliminated and the operation still cannot be started normally, please contact directlyShanghai Meiyingpu Instrument Manufacturing Co., LtdThe after-sales service department of the company should not ask personnel who are not familiar with the performance of this machine to disassemble and repair it, in order to avoid accidents.

5Application reference for stirring rod in stirring experiment operation

1. Three bladed propeller type: used at medium to high speeds. Make the mixed medium flow axially from top to bottom with low shear force.

2. Four bladed propeller type: used at medium to high speeds. Make the mixed medium flow axially from top to bottom, generating local shear forces.

3. Dissolved: Used at medium to high speeds. The strong turbulence and high shear force generated by radial flow from both top and bottom of the mixed medium can crush particles in the liquid.

4. Centrifugal: Used at medium to high speeds. The double blades open with increasing speed and are suitable for use in narrow mouthed containers. The stirring effect is similar to that of a four bladed propeller.

5. Fan type: Used at medium and low speeds. It generates small tangential flow turbulence and has good heat exchange performance, making it suitable for applications that require gentle stirring of media.

6. Anchor type: Used at low speeds. Generate tangential flow and form high shear rates at the edges. Make the mixed medium less likely to deposit on the container wall. Applied to polymer reactions andliquid Mineral composition in the bodyscatter It is an ideal stirring element for medium to high viscosity fluids.

1、Three bladed propeller type2、Four bladed propeller type 3、Dissolved formula 4、centrifugal 5、Fan type 6、anchor type

2.Mixing rod randomly matched

VIafter-sales service

1. Within one year from the date of purchase, if there are any quality issues with the product itself,thisThe company will be responsible for warranty.

2. If due to improper use or human damage by the user,thisThe company shall not bear any responsibility or related maintenance costs.

3. The warranty of this machine must be accompanied by a warranty certificate.

4. Any internal structure of this machine that has been disassembled by oneself or any parts that our company specifically prohibits disassembly in the manual will be considered as human damage.

5. If this machine exceeds the warranty period, the maintenance costs incurred will be borne by the user themselves.

Notes:

1、To ensure the safe operation of this machine, please connect all key connection pointsscrewSecure firmly and check regularly to prevent loosening.

2、Before debugging the device with input power, please read carefullyread“Usage and maintenanceprotect”Afterwards, it can proceed.

3、This machine is prohibited from being used in flammable and explosive environments.

4、The power socket of the input device must have a good grounding. It is strictly prohibited to lead the grounding wire to telephone lines, metal water pipes, gas pipes, and lightning rods.

5、Before using this machine, a driving test should be conducted on the main engine. Please do not install the mixing blade during the experiment.

6、This machine is prohibited from starting the mixing operation when the blades of the mixing rod are not placed in the mixing medium.

7、To ensure safety, when the experiment requires close observation of the effect, the operator should wear a protective cap to prevent their hair from being caught up by the rotating stirring rod clamp of the machine.

8、This machine should be placed in a clean and dry place, kept tidy, protected from moisture, and used in an environment with a temperature not exceedingpass 40℃Strictly prevent all kinds of foreign objects from splashing into the motor.

9、When using this machine in a relatively humid environment, please equip it with a leakage protection device to ensure the personal safety of the operator.

10、 This machine can cause speed loss of control when used in a power grid with severe voltage fluctuations. Please use a power stabilizer.

11、 When using this machine in a highly corrosive environment, please take necessary protective measures to prevent damage to the mechanical and electrical performance of the equipment.

12、If this machine is used for experiments in the presence of volatile and flammable media, strict and effective measures must be taken to prevent the emission of flammable and explosive gases, and to avoid the explosion of flammable and explosive gases caused by electric sparks, resulting in fire accidents.