High speed laser sensor BLINK FR

NegotiableUpdate on 03/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

High speed laser sensor BLINK FR

Product Details

High speed laser sensor BLINK FR

Product features:

● High speed response: several tens of times faster than standard thermopile sensors

High resistance to light damage: 1.5KW/cm²

● Large receiving area: 16 × 16cm

● Widthwavelength range：250nm~1100nm and 10.6um

The BLINK FR sensor is based on a novel patented technology that enables a natural response time of up to 90ms (typ) while maintaining a wide spectral response range and high power density tolerance. It can directly accept power up to 60W. Mainly used for detecting ultrafast light sources and systems

Compared with traditional thermopile sensors, the response time of BLINK FR sensor is only 50ms.

Product model and performance parameters:

model	BL-W-50W-16-K
maximum average power	50 W
minimum power	30 mW
Noise Equivalent Power (NEP)	15 mW
Natural effect time (0-90%)	Typ. 90ms (50~120 ms)
Power calibration uncertainty	±3%
Power linearity (1)	±5%
Receiving area	16mm x 16mm
Absorbent type	K
spatial non-uniformity	±3%
Absorption spectrum range	0.2 - 25 µm
Calibrate spectral range	0.25 - 1.1 µm; 10.6 µm
Maximum power density (2)	1.5 KW /cm²
Cooling method	Water cooling (3)
weight	130g
size	56x56x18.5mm
Cable length - connector	1.5m-DB15&RS232; 2.5m-USB;

Note: (1) The detector focused on illuminating useful surfaces50%(2) Measured at 1064nm and 10W, the damage threshold depends on the power level; (3) The minimum water flow rate is 1L/min, the maximum is 4L/min (@ 10 ℃~25 ℃), and the allowable rate of water temperature change is less than 1 ℃/min

Product size: