High speed water light needle syringe filling machine

High speed water light needle syringe filling machine：This equipment is an automated filling and sealing machine specially designed by our company for plastic syringes and pre filled needle tubes. It can achieve fully automatic tube loading, centrifugal tube management, filling, and capping, and can be connected to lamp inspection, sterilization tray, rod addition, labeling, weight inspection, pillow packaging machine, etc. to form a fully automatic production line. The whole machine is servo controlled and has stable structure. It is suitable for syringe products of various specifications, filling of normal saline, sodium chloride, chitosan, dental gel and other materials, and is widely used in various bio pharmaceutical, dental and other industries.

Product Parameters

Machine Name: Tube Rinse Filling Machine

Filling accuracy: ± 1%

Production capacity: 2000-4000 units/hour

Screw cap qualification rate: ≥ 99.9%

Equipment noise: ≤ 70 decibels

Total power: approximately 5KW

Applicable materials: water and paste

Applicable specifications: 1mlong/1-3ml/5ml/10ml/20ml/30ml plastic pre filled syringe (requires replacement of specification parts)

Filling range: 0.1-30ml (plunger pump needs to be replaced)

Number of filling needles: Multiple

Voltage: 380V 50Hz

Compressed air: 0.6-0.7Mpa

Dimensions: 3500 * 1500 * 2400 (mm) (including laminar flow)

Whole machine weight: 800KG

High speed water light needle syringe filling machine

Product advantages

1.This product is widely applicable to various types of catheter flushers, and can achieve linked production lines such as silicification, filling, capping, lamp inspection, loading and sterilization, rod labeling, and packaging of finished products.

2. Adopting a 15 'Siemens high-definition large screen

3. Complete Schneider servo system control, precise filling and capping, filling accuracy ± 1%

4. Vacuum gas pipelines are equipped with bellows filters and sanitary diaphragm valves to ensure cleanliness

5.The structural design is simple and easy to clean and maintain on a daily basis

6. An automatic replenishment system can be optionally selected, which uses liquid level sensing to automatically replenish materials when there is a shortage.

7.The whole machine is made of SUS304, and the parts in contact with the material are made of 316L and silicone, which meets GMP requirements

8. Intelligent software with precise settings for each step.

9.Adopting precise ceramic plug pump, suitable for various materials, high viscosity materials can also be easily filled