Hydraulic nut cutting machine

Introduction to hydraulic nut cutting machine

The bolt caps (nuts) widely used in industrial production are corroded and bitten to death in outdoor high temperature or corrosive environments, and some have damaged threads due to impact. In short, it is very difficult to disassemble the nuts when problems occur. In the past, the usual practice was to use (gas) welding to cut off the nuts and bolts together. However, in some special working conditions, it is sometimes strictly prohibited to use (electric) welding operations, such as coal powder silos in power plants, high-pressure and high-temperature pipelines in oil pipelines, etc. It is even more helpless to replace nuts and bolts. The nut cutter can solve the problem of bolt and nut disassembly and replacement without using fire, electricity, or damaging the bolt threads, which is simple, fast, safe, and efficient.

Instructions for using hydraulic nut cutting machine

1Open the oil filling plug and fill the manual oil pump box with oil20#Oil, or hydraulic oil, and close the unloading valve.
2Insert the head hole of the shredder into the nut to be broken and straighten it out.
3Press the manual oil pump to push the chopper out and into the nut. When the chopper is pushed into half of the nut, be careful to press the manual pump to avoid excessive force, as the chopper quickly splits the nut and damages the bolt thread.
4When you hear the splitting sound of "ba", it means that the nut has been broken and the pressure has stopped.
5Unscrew the unloading valve, return the chopper to its original position, and remove the chopper to complete the work.

Physical picture of hydraulic nut cutting machine

Due to differences in production batches and specific models, the above pictures are for reference only. For more details, please contact our sales personnel for specific verification

customer satisfaction questionnaire