LCDG-DMSD60 Multi channel Electrical Measuring Instrument

main features

This energy meter can measure real-time electrical parameters and energy of three-phase and six circuits, and one meter is equivalent to six three-phase electronic energy meters. Using LCD display, configuration parameters can be set with buttons; RS485 communication interface can be used to exchange data with the upper computer, supporting modbus RTU protocol and DLT645-2007 protocol, facilitating automation management of electricity consumption.

●Real time measurement of six channel total and phase separated electrical parameters

●Real time total energy and phase separated energy metering

●Demand recording and storage

●14 time periods with 4 different rates for energy metering and storage (not supported by Modbus protocol, supported by 645 protocol)

●Data storage and retrieval for 20 settlement days (Modbus protocol supports 20, 645 supports 12)

●60 timed freezing of data storage and reading (not supported by Modbus protocol, supported by 645 protocol)

●3 times of instantaneous freezing data storage and reading (not supported by Modbus protocol, supported by 645 protocol)

●Freeze data storage and reading for the next day (Modbus protocol supports 40 times, 645 supports 62 times)

●254 hourly freezing data storage and reading (not supported by Modbus protocol, supported by 645 protocol)

●3328 times storage and reading of load record data for categories 1-6 (not supported by Modbus protocol, supported by 645)

●Supports RS485 communication, verification methods, and baud rate settings

●Supports DLT645-2007 protocol and Modbus RTU protocol

●8-bit wide temperature LCD, displaying electrical parameters and energy

●Key setting configuration parameters and battery reset

●LED status indication

●After power failure, all stored data will not be lost and can be maintained for more than 10 years

●High precision real-time clock with backup battery, supporting perpetual calendar