LGSR50V Roots Vacuum Pump

LGSR50V Roots vacuum pump is commonly used in food processing, metallurgy, aquaculture oxygenation, building materials industry for blowing air, aeration oxygenation, exhaust, drying, pneumatic conveying and other purposes. The LGSR50V Roots vacuum pump has various types such as 50V Roots pump and 50V high-pressure Roots pump. It has high volume utilization rate, high volume efficiency, reliable performance, long service life, low equipment cost, simple structure, and easy operation and maintenance.

PRODUCT INFORMATION

Product Name: LGSR50V Roots Vacuum Pump, 50V Roots Pump, 50V High Voltage Roots Pump

Brand: Longgu

Type: Roots blower

Product advantages

The LGSR50V Roots vacuum pump is a practical blower equipment that can be used in industries such as food processing, metallurgy, aquaculture oxygenation, and building materials. It has the advantages of high volume utilization rate, high volume efficiency, reliable performance, long service life, low equipment cost, simple structure, and convenient operation and maintenance. Longgu Heavy Industry [Product 2] is a low-noise fan equipment with a wide range of uses, advanced technology and high cost performance. The 50V high-pressure Roots pump can be used for air blowing and supply, aeration and oxygenation, exhaust, drying, pneumatic conveying, etc. It is easy to operate and maintain.

Product Features

The LGSR50V Roots vacuum pump is mainly composed of a casing, wall panels, impellers, inlet and outlet mufflers, gears, bearings, seals, V-belts, couplings, pressure gauges, pressure relief valves, elastic joints, and other structures. For occasions with high noise requirements, inlet and outlet mufflers or soundproof rooms can be installed according to the noise requirements. The Longgu 50V Roots pump has the following characteristics

Low vibration, good rotor dynamic balance, small gas pulsation, and more stable operation.

The equipment has a compact structure, small size, low noise, light weight, easy to use, and is easy to maintain and repair.

One machine with dual functions of blowing and suction, not only capable of air supply, but also capable of negative pressure suction.

The fan can operate with little or no oil, and the output air will not be contaminated, resulting in cleaner output gas.

Product principle

Principle of LGSR50V Roots Vacuum Pump

The LGSR50V Roots vacuum pump is equipped with two three bladed impellers on two parallel shafts. There is always a small gap between the impellers and the inner hole surface of the elliptical housing, as well as between each impeller. Due to the constant rotation of the impellers in opposite directions, a certain amount of gas surrounded by the housing and impeller is transported from the suction side to the discharge side. Each impeller is always maintained in the correct phase by synchronous gears, and there is no contact between them. Therefore, it can be high-speed, does not require internal lubrication, and has a simple structure. It runs smoothly and reliably, and can be used for industries such as food processing, metallurgy, aquaculture oxygenation, building materials, etc. for air blowing, aeration oxygenation, exhaust, drying, pneumatic conveying, etc.

Selection of LGSR50V Roots Vacuum Pump

When selecting the LGSR50V Roots vacuum pump, it is necessary to determine the required air volume pressure and whether there are special requirements to choose the appropriate fan model, type, and material. Normally, the performance parameters given on the product samples of fan manufacturers are under standard intake conditions. However, the 50V Roots pump is not in a standard state in actual use, and the operating conditions and environment (such as temperature, atmospheric pressure, altitude, etc.) also need to be considered. The performance of the fan will also change. When designing and selecting, the performance parameters on the product samples cannot be directly used. Instead, the performance requirements of the fan need to be converted into the fan parameters under standard intake conditions based on the actual usage state to select the appropriate model of 50V high-pressure Roots pump.

The electroplating tank is used as a gas source to optimize the quality of electroplating (uniform coating) by transporting gas inside the electrolyte layer and circulating the electrolysis.

The transportation of powder particles is used to transport granular raw materials such as gas chloride and polyethylene (which can also be inhaled).

Air lift pump uses bubbles to reduce the specific gravity of sewage and achieve water lifting.

Production line drying, used for drying small-scale production lines.