Leather metal high and low temperature tensile testing machine

Tensile testing machine (computer) Leather metal high and low temperature tensile testing machine

The tensile testing machine is electronicA new type of material testing machine that combines technology with mechanical transmission has a wide and accurate loading speed and force measurement range. It has high accuracy and sensitivity in measuring and controlling loads, deformations, and displacements. It can also perform automatic control tests for constant velocity loading, constant velocity deformation, and constant velocity displacement, and has the functions of low cycle load cycle, deformation cycle, and displacement cycle.

oneTechnical parameters: Leather metal high and low temperature tensile testing machine

1. Induction method: Load element.

2. Capacity:50kg (optional), power accuracy within ± 0.5%.

3. Force decomposition degree and accuracy: 1/250000, ± 0.5%.

4. Displacement decomposition degree: 0.001mm.

5. Unit switching: kgf, gf, lbf, N, kN.

6. Effective width: Approximately 80mm in front and back ∝.

7. Journey: 600mm (Excluding fixtures).

8. Test speed: can be freely controlled by the computer at 10-300 mm/min.

9. The test modes are available for selection as follows (choose one).

(1) Tensile test (2) Tear test (3) Peel test.

(4) Compression test (5) flexural test.

10. Display mode: Computer display.

11. Test report content: Customers can freely set it themselves.

12. Basic equipment of the machine:

(1). Can set upper and lower limit travel protection (2) One set of screw dust cover.

(3). Emergency stop switch (4) Test status system overload automatic shutdown protection.

13. Machine voltage: 1 ∧, AC 220V,10A.

2、 Basic configuration:

1. Power system: AC variable frequency motor+AC driver+ball screw+planetary reducer+synchronous belt drive.

2. Control system: Pulse Command control method is adopted to achieve more precise control.

3. Computer (optional): (1) Computer desk (2) One list machine.

4. Machine accessories: Comes with a set of standard tension fixtures.

3、 Software Function Introduction:

1: Testing standards include GB, ASTM, DIN, JIS, BS, etc. Test standard specifications.

2: Sample data: Provide users with the ability to set all sample data and input it repeatedly.

3: Dual report editing: Open user editing reports for testers to choose from.

4: The units of strength are Kg, N, KN, g, lb, and the units of deformation are mm, cm, and inch.

5: Auto Scale automatically optimizes the scale of graph curves, allowing graphs to be displayed at scale. And can be used in Real time graphic dynamic switching during testing. Having a load capacity-Displacement, load time, displacement time, and multi curve comparison.

6: The test results can be output in the form of EXCEL data format.

7: After the test is completed, it can be automatically saved or manually saved. After the test is completed, the strength, upper and lower yield strength, tensile strength, compressive strength, elongation strength at any point, load extension at any point, elastic modulus, elongation rate, and peel interval value can be automatically calculatedmostsmall valueAverage value, bending modulus, etc.

8: The software can achieve control modes such as fixed speed, positioning movement, and fixed load.