-
E-mail
sales@acez.com.cn
- Phone
-
Address
2105B SEG Plaza, Huaqiang North Road, Futian District, Shenzhen
Shenzhen Yijie Instrument Co., Ltd
sales@acez.com.cn
2105B SEG Plaza, Huaqiang North Road, Futian District, Shenzhen
M201 Rotary Gas Meter Tester

The M201 rotary gas meter detector is specifically programmed to measure differential pressure and display the true average of these measurements. Users can control the measurement average time. This feature solves the problems of traffic surge and pulsation.
The M201 rotary gas meter detector has an accuracy of 0.1% FS (28 "water column range) or 0.05% FS (200" water column range). Compared with mechanical instruments or pressure gauges, it has better accuracy in low pressure drop range. The M201 rotary gas meter tester is very suitable for on-site use, and its accuracy is not affected by temperature within the calibrated range of 23 ℉ to 122 ℉. The temperature effect can cause serious accuracy errors in mechanical instruments, liquid pressure gauges, and some digital counters.
Digital display can eliminate parallax, and based on the instrument range, the resolution can reach 0.01 or 0.001 "water column. The minimum/maximum function allows users to see the maximum and minimum recorded pressures during testing. The instrument is portable and can be used to read manifolds as a whole. The M201 rotary gas meter tester can be safely used on pipelines with static pressures up to 150 PSIG.
accuracy-
DN0028:+ 0.1%FS 0-28“
DN0200:+ 0.05%FS 0-200“
Within the range of 23 ° to 122 ° F (-5 ° to+50 ° C), it is not affected by temperature.
Engineering unit
Inches of water column (choose 4 ℃, 20 ℃ or 60 ℉) PSI, Millimeter mercury, inch mercury, millibar, bar, kilopascal, kilogram/square centimeter, centimeter water column, user selectable scale.
Media compatibility:
DN: Non insulated sensor for clean, dry, non corrosive gases..
On site recalibration
M201 series zeroing, range and linearity can be recalibrated on site. Users can choose between a 1-point or 5-point calibration program. Enable users to calibrate their equipment on-site with precise reference objects.
Pressure limit
When only applying pressure to the high-pressure side of the differential pressure unit, it is twice the range; When pressure is applied to both sides of the sensor simultaneously, the static pressure is 150 PSI (10.5 Kg/cm2).
minimum/Maximum Collection
The collection speed is 10X per second.
operate
During the connection of the pressure gauge, push the reading valve to keep the high and low sides equal. Open M201 "ON" to obtain information "Press Hold to collect data. ”Press the "HOLD" key to start the test. The user confirms the testing time and presses the "HOLD" button again to end the test. The display screen will show the average pressure difference across the pressure gauge from the start to the end of the test. Press the "HOLD" button again to start a new test.
Automatic shutdown
User shutdown option. Program for 10, 20, 30, 45, 60 minutes and disable
technical specifications
base unit
14 oz (6.5 "X 3.6" X 2.25 ") polycarbonate, permanently dissipative, anti-static protection.
keyboard
Sealing film type with 5 dome shaped contact buttons
display
5-digit significant digital LCD display (0.25 "high), adjustable contrast 2-line X16 alphanumeric characters including backlighting.
power supply
Four No. 5 batteries can be used continuously for more than 100 hours.
Parts that come into contact with liquids:
DN: 316L stainless steel, brass, fluororubber
Connector
1/8 "NPT internal thread, 316L stainless steel
NISTTraceability accuracy
DN0028:+ 0.1%FS 0-28“
DN0200:+0.05% FS 0-200 "F.S. Refer to the" Pressure Range "table for the entire range
Temperature specifications
Storage temperature: -40 ℉ to 140 ℉ (-40 ℃ to 60 ℃)
Operating temperature: 23 ℉ to 122 ℉ (-5 ℃ to 50 ℃) I.S. model
-4 ℉ to 122 ℉ (-20 ℃ to 50 ℃) G.P. model
| Pressure Range | ||
| DN0028 |
0-28” H2O |
Differential pressure (+. 1% F.S.) |
| DN0200 |
0-200” H2O |
Differential pressure (+. 05% F.S.) |
authentication
Ex ia IIC T4
DEMKO 06 ATEX 0615699 IP 40
Class I,Div.1 Groups A,B,C,D, T4
Intrinsically Safe, Exia
Class I, Zone 0, AEx ia IIC T4
Class I, Zone 0, Ex
-5 C < Ta < +50 C
ordering information
Model and Description
M201- (indicating pressure range) - Rotary gas flow meter tester (only applicable to DN0028 or DN0200 sensor range)
All models include
Red protective rubber sleeve
Four No. 5 batteries
Paper version user manual
Ordering Options
Intrinsic safety certification
| Z9P000107 | Hard Mobile Toolbox |
| Z9P000108 | Hard portable bag with vacuum pump |
| Z9P000109 | Hard portable bag with pressure pump |
| A34386 | Connector kit |
| A900016-90727 | Peter plug adapter, Y8“ |
| A900016-90733 | Peter plug adapter, Y16” |