MFT 4010 with HART ® Modular calibrator for communicator

MFT 4010Equipped with HART ® Modular calibrator for communicator

MFT 4010 is a calibrator and HART that can truly reduce on-site calibration time ® Breakthrough combination of communicators. The MFT 4010 series integrates the multifunctional calibrator and HART in a handheld device ® The convenience of communication devices. Users can view up to four measurement data simultaneously on a high-resolution LCD display or use HART ® Compare the PV and AO values with the corresponding values measured by NIST traceable MFT. Calibration results and HART ® Configure records as standard records

The available modules include differential pressure, gauge pressure, vacuum pressure and absolute pressure, as well as temperature and voltage/current. Integrate a voltage and current meter into the basic unit. All HART field devices can be accessed through the use of HART ® Configure, inquire, and adjust the communicator. The Device Specific command sent to supporting devices is included in MFT

Multi in one toolReplacing multiple handheld devices simplifies workload and improves production efficiency.

automationHART ®Field Device

Calibration is achieved through automatic setting of the calibration instrument based on instrument settings to achieve automation; Digital settings automate the adjustment steps of equipment

Supported calibration types- Pressure, t/ c，RTD，I / P，P / I， Switching between traditional loop and mA/V or HART ® Transmitter or local indicator.

Document creation/Remaining calibration results-Create calibration programs on handheld computers or download them from compatible device management software. Save the results to non-volatile memory.

On site updates– Use the Internet to download updates and add features/HART ® support.

module- Choose from a range of locked measurement modes to ensure good versatility

On site re certificationThe sensor module and V/I as a whole can be recalibrated to zero, range, and one-to-one correspondence through MFT.

user interface -A 2.1-inch x 2.1-inch display screen, consisting of four soft keys (defined according to mode requirements) and eight hard keys, forms the user interface. The monitor can be set to display 1-4 measurement data items.

User convenience -Automatic shutdown, shock absorption, minimum/maximum value acquisition, data retention display function, sensor zeroing, direct contrast adjustment.

safety lock- Lock special MFT settings or all settings at once.

diagnosis-MFT4010 will self detect when connecting power or installing sensor modules. The warning will be displayed on the monitor.

for a special purposeDOFMemory- Supply 500HART ® The memory used by device drivers. General DOFs in 2013.

Model and Description

MFT 4000 calibrator - a basic unit used for calibration work with selected NIST traceable sensor modules and overall voltage/ammeter. Contains documents.

Contains module and all Device Specific HART ® The MFT 4010 calibrator Quick Cal, the basic unit of communication, will be used for HART calibration ® The NIST traceable measurement results of PV and AO are displayed together with MFT. Users can identify the required adjustments (plural) and use the fine-tuning function (S) from the same display. Smart Trim allows for the selection of analog or digital fine-tuning functions without the need to navigate through a menu tree. Contains documents.

Recording - The recording memory can store up to 200 HART devices ® Configuration files and over 100 calibration results (discovered and legacy data [each with up to 21 key points], time/date information labels). Communicate with PC through DB-9 connector.

Standard accessories

Two AC power adapters placed in open sensor slots, suitable for 100-240 volt AC power with American plugs, international plug kit

HART ® Wire components and supply for HART ® 250 ohm parallel adapter used for communication (MFT 4010) test lead kit

RS-232 serial communication cable

Printed user manual

Protective rubber sheath

DPC Management Tool - Updating Firmware and HART ® Driver

Options

Pressure module (please refer to data sheet PRESS40000:215-1)

RIO module (please refer to data sheet PRESS40000:215-3)

TIO module (please refer to data sheet PRESS40000:215-2)

VMA module (please refer to data sheet VMA4000:215-2)

A soft carrying case with shoulder straps can carry basic units, modules, pumps, wire sets, and accessories/pipes.

Hard suitcase with foam handle, with basic elements/accessories of 3 mounting modules, 4 additional modules, wire set, hand pump, RTD probe, accessories.

standard

base unit

A plastic box made of ABS material measuring 9.00 inches in length, 4.70 inches in width, and 3.58 inches in height, with shock-absorbing guide pulleys, weighing 28 ounces, and three grooves for placing measurement modules

keyboard

A covered keyboard with 10 dome shaped touch buttons and 4 soft keys, relying on the alpha matrix on the LCD display to input letters; Relying on keystrokes to input data

display

128 × 128 pixel display, 2.1-inch × 2.1-inch visible area, 5-digit resolution

power supply

6 AA alkaline batteries or nickel hydrogen batteries, optional 100-240 volt AC power adapter

Connector

Supply ± 50mA/V DC and HART ® Standard banana shaped socket used (34 inch center)

authentication

CE certification.

According to CSA 22.2 and UL 913 certification standards, it has been recognized by MET laboratory as intrinsically safe, Level 1, Div Zone 1

NIST traceable accuracy current/voltage: ± 0.025% of full range, ± 0.001% of range at each Fahrenheit temperature (reference temperature 70 Fahrenheit) (refer to module data sheet for accuracy)

module

2.3 inches long x 1.3 inches wide x 2.6 inches deep, weighing 8.3 ounces or less. Pull the latch to close the lock and press the locking device to open the lock. The electrical connection is made through the PC board to the spring-loaded receiver on the reference component. Insert into the hollow to protect any vacant groove (S). (See module data sheet)