Makeup cotton drying equipment, industrial microwave sterilizer

Makeup cotton drying equipment, industrial microwave sterilizerFeatures:

1. Microwave heating drying powder puff sponge has good uniformity and low temperature. During microwave heating, the part of the puff sponge with high moisture content absorbs more microwave power than the part with lower moisture content. So microwave heating and drying of powder puff sponge can achieve good drying uniformity, and the material temperature for microwave drying is 85-100 degrees.

2. Continuous production efficiency is high and the time is short. Due to the fact that microwave heating drying is a holistic heating method that directly penetrates through the puff sponge to heat the molecules of each puff sponge, and rapidly heats them through ultra-high frequency friction to achieve the drying purpose, the production efficiency is high, the time is extremely short, and continuous production can be achieved. Wan can fully cooperate to establish a puff sponge assembly line production mode, greatly improving production efficiency. Microwave drying powder puff sponge drying can achieve a moisture content of less than 1000% for certain materials.

Makeup cotton drying equipment, industrial microwave sterilizer

3. An is fully energy-efficient and environmentally friendly. The puff sponge microwave drying equipment converts electrical energy into microwave energy, and then converts electric heat into thermal energy through ultra-high frequency friction of each puff sponge molecule. Therefore, it has low energy consumption and is environmentally friendly in terms of electricity use, with no wastewater or exhaust gas generated.

4. The puff sponge microwave drying equipment has a small footprint. Can quickly and continuously produce puff sponge.

5. The puff sponge microwave drying equipment can be matched with assembly line production, with excellent performance.

6. In addition, microwave drying does not require a heat source and only heats and dries the puff sponge, so the equipment has no thermal inertia and can be turned on and off immediately.