Metal powder loose density meter

NegotiableUpdate on 05/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Metal powder bulk density meter, powder flowability tester, powder bulk density meter, Hall flowmeter, powder flowability tester, and bulk density meter are designed and produced in accordance with the national standard GB//T16913-2008. This device is suitable for measuring the density of dust accumulation. Please refer to the relevant regulations for the collection of sample dust in the dust physics experimental method. Powder loose packing density meter, Hall flowmeter, powder flowability tester principle: Dust falls freely from the funnel mouth at a certain height and fills the measuring cylinder; Measure the mass of dust per unit volume in the measuring cylinder in a loose state, that is, the dust packing density. It is also possible to measure the resting angle of the natural pile density meter. The instrument structure includes a funnel outlet diameter of 12.7mm, made of stainless steel material, with a funnel taper of 60 °± 0.5 °, a funnel volume of 120ml, a powder loose packing density meter, a Hall flowmeter, and a powder flowability tester. The principle of the Hall flowmeter is designed and produced according to the national standard GB1482-84. This device is suitable for measuring the flowability of metal powders using the standard funnel method. Any powder that can freely flow through a standard funnel with an aperture of 2.5mm can use the flowability of the metal powder in this device, expressed as the time required for 50g of metal powder to flow through a standard funnel with a specified aperture, according to the national standard GB1482-84. To determine the loose density value, a 5.0mm standard funnel should be selected, which complies with the national standard GB1479-84 (Determination Standard for Loose Density of Metal Powder). The structure of the metal powder loose density meter and powder flowability tester XF-02 is as follows: 1. Leakage .....

Product Details

Product Introduction

Metal powder bulk density meter, powder flowability tester, powder bulk density meter, Hall flowmeter, powder flowability tester
The bulk density meter is designed and produced in accordance with the national standard GB//T16913-2008. This device is suitable for measuring the density of dust accumulation. Please refer to the relevant regulations for the collection of sample dust in the dust physics experimental method.
Principles of Powder Loose Density Meter, Hall Current Meter, and Powder Fluidity Tester
Dust falls freely from the funnel at a certain height and fills the measuring cylinder; Measure the mass of dust per unit volume in the measuring cylinder in a loose state, that is, the dust packing density. You can also measure the angle of rest
Structure of natural packing density meter instrument: The diameter of the funnel outlet is 12.7mm, made of stainless steel material, with a funnel taper of 60 °± 0.5 ° and a funnel volume of 120ml
Principles of Powder Loose Density Meter, Hall Current Meter, and Powder Fluidity Tester:
The Hall current meter is designed and produced in accordance with the national standard GB 1482-84. This device is suitable for measuring the flowability of metal powders using the standard funnel method. Any powder that can freely flow through a standard funnel with an aperture of 2.5mm can use this device
The flowability of metal powder is expressed as the time required for 50g of metal powder to flow through a standard funnel with a specified aperture, according to the national standard GB 1482-84. To determine the loose density value, use a 5.0mm standard funnel that complies with the national standard GB1479-84 (Determination Standard for Loose Density of Metal Powder)
The structure of the metal powder loose density meter and powder flowability tester XF-02 is as follows
1. The diameter of the funnel outlet is 2.5mm and 5.0mm. The funnel is made of stainless steel material, with a taper of 60 °± 0.5 ° and a volume of 120ml
2. The blocking rod is made of stainless steel material and is used to prevent dust from falling when it is loaded into the funnel.
3. The maximum weighing capacity of the balance (to be provided by the user) is 100g, with an accuracy of 0.02g.
4. The measuring cylinder is equipped with one stainless steel measuring cylinder with a capacity of 25ml and an inner diameter of Φ 39mm.
5. Scraper made of stainless steel material, used to remove excess dust when dust is loaded into the funnel
To learn more information,Please log in to our websitehttp://www.xfyiqi.com Or call for consultation:Kang Yulin0592-518-7269 187-5927-8268 QQ：958-747-345
Powder Bulk Density Meter Manufacturer, Powder Loose Density Tester, Loose Density Meter Rubber Raw Material Density Meter, Rubber Powder Loose Density Tester, Metal Powder Loose Density Meter, Powder Flowability Tester, Plastic Film Density Meter TW-300A, Plastic Product Density Meter, Cable and Wire Specific Gravity Meter, Tsushima Electronic Balance AUY120, One thousandth Electronic Balance, Plastic Particle Density Meter PVCPEBS specific gravity meter, SFY-20A plastic moisture analyzer, offline/halogen moisture meter, ceramic green density meter, alumina ceramic specific gravity meter TW-300C, solid-liquid powder three purpose specific gravity balance, vibration density tester, bulk density meter, PVC resin powder bulk density tester, wood water absorption rate tester TW-120W, insulation material specific gravity balance, multifunctional solid-liquid dual-use density detector GP-300S, refractory material density meter, polyurethane foam density meter TW-300Y