- Phone
-
Address
B210, Silicon Valley Bright City, No.1 Shangdi South Road, Haidian District, Beijing
Product Categories
Beijing Jinkun Technology Co., Ltd
Microwave fiber optic transmission module
NegotiableUpdate on 03/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The ROF030M fiber optic transmission module is a product designed by Beijing Jinkun Technology to transmit 0.1-3GHz microwave signals through optical fibers in a small volume for integration into circuit boards. It has the characteristics of low cost and high performance. Widely used for various signal transmission in the L-band, ranging and microwave signal conversion to optical signal processing.
Product Details
This series of products isMicrowave fiber optic transmission module or system（RF over Fiber）It has 3GHz, 5GHz, 10GHz, Products with different bandwidths such as 20GHz can convert RF signals into optical signals, transmit them through optical fibers, and then convert the optical signals back into RF signals at the receiving end. According to the needs, unidirectional and bidirectional transmission systems can be selected.
advantage
1. High bandwidth
2. Anti electromagnetic interference
3. Support wavelength division multiplexing with one fiber optic transmission for multiple signals
4. Anti surge power protection, reliable power environment adaptability
5. Adaptive temperature compensation capability, controlling the stable output of the light source.
6. Compact and small volume
7. Applicable to * * standards.
Application scenarios
1. Pull the radar antenna far away
2. Long distance RF signal transmission
3. Radio signal monitoring
4. Microwave signal transmission coverage
5. Electronic Warfare
6. Radar signal delay
Parameter Table:
|
Parameter |
unit |
Indicator value |
|
Frequency range |
MHz |
one hundred |
|
– 3000 |
link gain |
dB |
|
>0 |
Flatness |
dB |
|
≤± 3input |
1dB |
Compression point |
|
dBm |
≥ |
0 |
|
VSWR |
NA |
10 |
|
≤ |
2:1 |
*Large input RF signal |
|
dBmDigital Noise FloordBm/Hz |
<-120 |
50 |
|
input |
/ |
Output Impedance |
|
Ohm |
Power supply mode |
VDC9V |
|
power consumption |
W |
<2 |
|
(Single module) |
Laser output wavelength |
nm |
|
1310/1550 |
Laser output power |
dBm |
|
>0dBm |
Detector operating wavelength |
nm1100~1650 |
|
Fiber optic connector type |
NA |
FC/APC |
|
interfaceRF connector typeNA |
SMA |
85*60Size（8TxEnd)mm |
|
*1(Excluding connectors |
) |
Size（ |
|
Rx |
End) |
mm4585*60*185 |
|
operation temperature |
℃ |
-45~665 |
storage temperature
℃+25-
~
Note:
All indicators areCalibrate the indicator value at ℃, and temperature changes may cause slight changes in the parameters. Can be used normally within the temperature range indicated.The module should maintain good heat dissipation during use.
