Oil water separator

NegotiableUpdate on 01/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

GF142RS oil-water separator $r $nGF42RS high-speed tube centrifuge can effectively separate oil-water mixtures and liquid-liquid solid three-phase separation, such as extracting impurities from oxidized organic silicon, kerosene, etc.

Product Details

GF142RS oil-water separator

The body of the GF142RS high-speed tube centrifuge is made of stainless steel material. The GF142RS tube centrifuge has a high-speed rotating slender drum, a feed inlet, and two discharge outlets. The outlet separation ratio of light and heavy liquid materials can be controlled by an adjusting ring. At the same time as liquid-liquid separation, the GF142RS tubular high-speed centrifuge also clarified the suspension. The solid phase of the suspension settles on the cylinder wall. The GF105 high-speed tube centrifuge has a slender rotating drum that rotates at high speed. The material flows in from the bottom inlet and there are two discharge ports in the upper part. One is a light liquid outlet and the other is a heavy liquid outlet. This centrifuge can be used for continuous separation operations. The high-speed tube centrifuge has a separation factor of up to 15900 and separates particles of 0.5 microns. It is suitable for separation between two liquids at different densities, such as separation between oil and water, and equipment for industrial production processes such as animal plasma proteins. 油水分离机

Oil water separatorGF142RS detailed technical parameters;

Drum speed	14000 r／min
The maximum centrifugal force	15900 R.C.F
Inner diameter of drum	Φ142mm
Effective length of drum	742 mm
Solid volume inside the drum 11	L
Material import pressure	＞1.5 kg
Production capacity (water flux)	200～1500 L/h
Motor power	3 kw
Overall dimensions	700×480×1620 mm
Inlet diameter	φ12 mm
Diameter of liquid outlet	φ38 mm
Whole machine weight	500kg

Selection instructions for water oil separation tube centrifuge:

1) If there are materials that cannot come into contact with grease, an optional damping system without grease lubrication can be used

2) If materials need to be separated at low temperatures, users should be able to choose cooling coils, and the cooling source should be provided by the demander.

3) The centrifuge can be equipped with a speed control system (the centrifuge speed can be adjusted)

4) The actual production capacity of a tube centrifuge depends on the characteristics of the material and the separation requirements.

Our company implements a three guarantee policy for the quality of equipment purchased by users. All models of equipment are provided with free installation guidance, assistance in debugging, and training for operators until they are mastered.

GF142RS oil-water separator