Overcurrent ultraviolet sterilizer

Product IntroductionIntroduction-Guangpu Guichuan-

Overcurrent ultraviolet sterilizerThe equipment chamber of the UV sterilizer is made of 304 and 316/316L stainless steel as the main material, and the external control box is made of steel plastic material. The ballast, work indicator light, work accumulation meter, and alarm system are all placed in the external control box; Using high-purity quartz tubing combined with high-performance ultraviolet low-pressure mercury amalgam disinfection lamp, it has strong sterilization power, long service life, stable and reliable operation, high sterilization efficiency, and long lamp tube service life. This model is highly favored by users, and customers can customize it according to the water quality and water consumption they need to treat!

Equipment featuresFeatures-Guangpu Guichuan-

External distribution box, which can be placed in separate spaces and compartments for separate operation;

Equipped with work indicator lights, work fatigue meters, and alarm systems;

Configure UV specific ballasts to ensure stable operation and prolong the lifespan and efficiency of UV sterilization lamps;

Equipped with high transmittance pure quartz sleeve and high stability medium/low voltage sterilization lamp tube, with a long service life and constant UV-C output during the service life;

The whole machine is made of 304/316/316L (optional) stainless steel material, polished inside and outside, and has the characteristics of corrosion resistance and resistance to deformation.

maintenancemaintenance-Guangpu Guichuan-

Regular cleaning of quartz casingFirst, turn off the power, remove the dust covers on both sides of the sterilizer, take out the lamp tube, remove the end caps, take out the "O" ring, and then slowly remove the quartz tube. When cleaning the casing, use alcohol as a cleaning solution. After cleaning, the operator should not directly touch the surface of the quartz tube with their hands to avoid dirtying and affecting transparency. Align the quartz tube with the water seal holes at both ends, insert the quartz tube with equal clearance at both ends, insert the "O" - shaped rubber ring, slowly and evenly tighten the pressure cap, and do not apply too much force to avoid causing the quartz tube to break. Then conduct a water test. If there is water leakage, gently tighten the pressure cap until there is no water leakage. After that, install the lamp tube and start running.

instructionsDescription-Guangpu Guichuan-

The ultraviolet sterilizer of this device is horizontally installed indoors, with the bracket fixed on a designated foundation or workbench. (Connect the inlet and outlet) The sterilization device is located indoors. In addition to considering the convenience of water supply and drainage and meeting the requirements of the process flow, attention should also be paid to leaving an installation position where the ultraviolet lamp tube and space can be extracted. The electrical control box is installed near the device, with a relative humidity of no more than 80 ℃, no corrosive gases, no conductive dust, and no strong vibration and impact.

This product is a pipeline type ultraviolet sterilizer, with two water outlets that can be selected as the inlet and outlet according to the pipeline direction. It can be placed horizontally or vertically according to user needs. To facilitate the replacement of light tubes and quartz tubes, there should be space of the same length on one side as the equipment.

After product installation, conduct a water test to ensure no water leakage, and then connect the power supply.

After connecting the power supply, the indicator light will turn on to ensure that the lamp head and lamp tube are connected properly. Then, press the "power switch" button on the dust cover and the lamp tube indicator light will turn on. The timer will rotate and wait for 3-5 seconds for the lamp tube to light up. At this time, the equipment will operate normally. After confirming that the lamp tube is on for 3-5 minutes, first open the water valve, and then open the water inlet valve. At this point, the machine will start running.

Installation sizeinstallation-Guangpu Guichuan-