Oxygenation device and oxygen bomb

This oxygenator has a compact structure and is easy to use.Oxygen bomb: made of heat-resistant and corrosion-resistant nickel chromium or nickel chromium molybdenum alloy steel, it needs to have three main properties:1. It is not affected by the high temperature and corrosive products that occur during the combustion process and produces thermal effects; 2. Able to withstand oxygenation pressure and instantaneous high pressure generated during combustion process; 3. Can maintain airtightness during the experiment. The cylinder volume is 250ml-350ml, and the bullet should be equipped with valves for oxygen supply and exhaust, as well as wiring electrodes for ignition power. New oxygen bombs and replacement parts (cylinder, warhead, connecting ring) of oxygen bombs should undergo a water pressure test of 20.0Mpa to prove that there are no problems before they can be used In addition, it is necessary to regularly observe the structures related to the strength of the oxygen bomb, such as the threads of the cylinder and connecting ring, the inlet valve, the outlet valve, and the connection between the electrode and the bullet head. If wear or looseness is found, it should be repaired and reused after passing the hydrostatic test Oxygen bombs should also undergo regular hydrostatic tests, and after each hydrostatic test, the usage time of the oxygen bomb should generally not exceed 2 years When using multiple designs to make the same oxygen bomb, each oxygen bomb is used as a complete unit