PI2114 gas concentration analyzer measures H2O2

NegotiableUpdate on 02/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Measure H2O2

Product Details

Picarro PI2114 can measure hydrogen peroxide (H2O2) as low as 3 ppb to prevent drug oxidation and ensure drug stability. Major pharmaceutical, contract manufacturing outsourcing (CMO), and isolator companies use Picarro hydrogen peroxide analyzers to achieve efficient API and biopharmaceutical production, as well as sterile filling and processing. The PI2114 analyzer runs quickly and is easy to use, without the need for chemicals or consumables. At the same time, only a small amount of calibration and maintenance is required to minimize operating costs.

Continuous real-time monitoring of H2O2
Detection limit:<3 ppb (5=''>3>)
Accuracy:<0.5 ppb (1 σ, 5=''>0.5>)
The rise time (10-90%) and fall time (90-10%) are within 2 minutes

The precision of 5 minutes is less than 0.5 ppb, the rise time (10-90%) and fall time (90-10%) are less than 2 minutes, and the detection limit is less than 3 ppb (5-minute average). The Picarro PI2114 hydrogen peroxide concentration analyzer has been optimized for GMP applications and its software complies with electronic record regulations. The built-in software of PI2114 complies with the requirements of 21 CFR part 11, and the software has strict regulations on electronic records, time, and audit tracking. The PI2114 software system, combined with detailed validation reports, software, and system files, provides a comprehensive and strictly controlled data management function that meets pharmaceutical and commercial manufacturing requirements. Picarro provides installation and operation certification documents (IQ and OQ), and features fast and easy validation using commercially available proxy gases.

Picarro PI2114 Performance Specifications	Technical specifications**
Accuracy (1 σ, 10 seconds) Accuracy (1 σ, 300 seconds)	<3='' ppb=''+'' reading=''> <1 ppb=''+='' reading=''>1>
Detection limit (3 σ, 300 seconds)	< 3.0=''>
Zero drift * (72 hours) Zero drift (1 month)	± 2.5 ppb - 5 ppb/+10 ppb
accuracy	± 5% of the reading
measuring range	0–100 ppm
Measurement Interval	About 10 seconds
response time (Rise time/Fall time 10-90%/90-10%)	< 1=''>

*The Picarro analyzer does not require the use of zero standard gas or zeroing modules to operate or meet specification requirements.

**Each ordered analyzer will provide technical specifications and instrument specific test reports (compliance certificates).

Picarro PI2114 System Specifications
measurement	cavity ring-down spectroscopy
Measurement pool temperature control	±0.005°C
Measurement pool pressure control	± 0.0002 atmospheric pressure
sample temperature	-10 to 45 ° C
Sample flow rate	760 pallets less than 1 standard liter per minute (slm), no filtration required
Sample pressure	300 to 1000 pallets (40 to 133 kPa)
Sample humidity	Relative humidity (RH) less than 99%, no condensation at 40 ° C, no need to dry
ambient temperature	10 to 35 ° C (operation) -10 to 50 ° C (storage)
ambient humidity	Relative humidity (RH) less than 99%, non condensing
Other gases measured	H2O、CH4
attachment	Pump (external, included), keyboard and mouse (included), LCD monitor (optional)
communication interface	RS-232、 Ethernet USB、 Simulate 4-20 mA
Pipe joint	¼”Swagelok ® PFA connector
External dimensions	Including the legs, it measures 17 inches wide by 8.38 inches high by 21 inches long (43.2 by 17.9 by 53.3 centimeters), 7.5 inches wide x 4 inches high x 11 inches long (19 x 10.2 x 28 centimeters) when excluding small external pump modules
weight	73 pounds (33.2 kilograms), including pump
Power requirements	100-240 volts AC, 47-63 hertz (automatic detection), and less than 260 watts at startup (total). In steady state, it is 110 watts (analyzer), 35 watts in steady state (pump)
authentication	CE Mark、CDRH
Country of manufacture	America
System Verification	Including software wizards for analyzer validation, using CH4 as the standard proxy gas

Software and User Account Management

function	Not logged in	login	operator	technician	administrators
Configure menu/settings (Additional login is required to access authentication or user management)		✔
View Data Viewer	✔		✔	✔	✔
Change display data		✔	✔	✔	✔
Exit measurement			✔	✔	✔
Configure 4-20mA output		✔
H2O2 verification				✔	✔
Change display data (Full access permission)					✔
User Management					✔