Plastic film dropper bottle forming machine

NegotiableUpdate on 01/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The production structure of SDC-I plastic film dropper bottle forming machine includes film material unwinding, folding heating, heat sealing, forming, film hole positioning, dropper placement, dropper detection, heat sealing, feeding, winding and cutting. The device can press ten droppers at a time, and the disc winding design is practical. The drip head is sorted and queued through a vibrating disc, and has a shortage detection prompt function, effectively avoiding quality problems.

Product Details

SDC-IPlastic film dropper bottle forming machinePerformance and technical parameters:

1. Product production process:Substrate feeding→fold→preheat→forming→cutting→Drip head feeding→Drop head delivery→Install dropper→Heat sealed dripper→Product roll up→ Complete in one go;

2. Voltage:380V，Power approximately:8.0kW；

3. PLC human-machine interface;

4. Maximum width of material:150mm；

5. Product dimensions66*26.5mm；

6. Stable production speed:6000 pieces/hour(With)66*26.5Calculate one unit per mm, the specific speed depends on the material;

7. Mitsubishi servo motor1 group;

8. speed reducer1 group;

9. main motor1 set (including gearbox);

10. Cam device1 set;

11. Substrate feeding1 set (magnetic powder brake+correction+constant tension control), with a diameter of approximately 350mm;

12. Material discharge joint inspection;

13. Buffer device1 set;

14. Folding device1 group;

15. Preheating device1 group;

16. Forming device1 group;

17. Traction device3 groups；

18. Edge cutting device2 groups;

19. Edge material crushing device1 group；

20. Drip head vibration disc device1 group;

21. Droplet detection device（Check if there is a head in the non drip head and ultrasonic heat sealing part1 set;

22. Dropper delivery device1 group;

23. Ultrasonic welding device2 groups;

24. Product cutting device1 group;

25. Product winding device1 set, with a diameter of approximately 600mm;

26. equipment enclosureMade of 304 stainless steel material, meeting the requirements of the medical and health industry;

27. wooden box1 piece;

28. Dropper provided by the demand side.