Precision impedance analyzer with a frequency of 20HZ10MHz and an accuracy of 0.0005

NegotiableUpdate on 07/29

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Description: JZKC-JMZK05A Precision Impedance Analyzer (frequency: 20HZ-10MHz, accuracy: 0.05%) can achieve various tests according to commercial standards and military standards such as IEC and MIL standards due to its performance. At present, this impedance analysis is widely used in major schools and research institutes across the country.

Product Details

JZKC-JMZK05APrecision impedance analyzer (frequency: 20HZ-10MHZ, accuracy: 0.05%)

JZKC-JMZK05APrecision impedance analyzer (frequency: 20HZ-10MHZ, accuracy: 0.05%)

Keywords: frequency, accuracy, resolution, level, bias

Impedance analyzer main

1、 Product Introduction:

JZKC-JMZK05AThe precision impedance analyzer (frequency: 20HZ-10MHz, accuracy: 0.05%) product can achieve various tests according to commercial standards and military standards such as IEC and MIL standards due to its performance. At present, this impedance analysis is widely used in major schools and research institutes across the country.

2、 Application scope:

1Semiconductor materials: dielectric constant, conductivity, and C-V characteristics of semiconductor materials

2Semiconductor components: parasitic parameter testing and analysis of LED driver integrated circuits; C-VDC characteristics of varactor diodes; Parasitic parameter analysis of transistors or integrated circuits

3Evaluation of dielectric constant and loss angle of dielectric materials: plastics, ceramics, and other materials

4Magnetic materials: evaluation of permeability and loss angle of ferrites, amorphous and other magnetic materials

5Liquid crystal cell: C-V characteristics such as dielectric constant and elastic constant

6Passive components: impedance parameter evaluation and performance analysis of capacitors, inductors, magnetic cores, resistors, piezoelectric devices, transformers, chip components, and network components.

7Other components: impedance evaluation of printed circuit boards, relays, switches, cables, batteries, etc

3、 Main technical parameters:

1.Test frequency: 20HZ-10MHz, 20HZ-2MHz, 20-5MHz, available in multiple options

2. Test level: 100mV-2V

3Resolution: 1MHz

4. Output impedance: 100 Ω

4. Test parameters: Cp/Cs、Lp/Ls、Rp/Rs、|Z|、|Y|、R、X、G、B、θ、D、Q、Vac、Iac、Rdc、Vdc、Idc

5. Basic accuracy: 0.05%

6. Display: LCD display

7. Parameter measurement: multifunctional graphics and parameter measurement

8. Interface mode: RS232C or Handler

9. Voltage: AC-220V