ROF060M RF fiber optic transmission module

NegotiableUpdate on 12/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The RF fiber optic transmission module is used to convert RF signals into optical signals, transmit them through optical fibers, and then convert the optical signals into RF signals at the receiving end. It has a long distance, high bandwidth, and flat response. Used in communication and radar systems. In satellite communication, point-to-point antennas can convert RF signals into optical signals through this device, and connect them to control rooms several meters to several kilometers away through optical fibers. Broadcast signals can also convert RF signals into optical signals and transmit them through optical fibers. The radar system can connect the radar antenna and signal room remotely through this method. RF optical transceivers have different RF bandwidths of 8GHz, 15GHz, and 20GHz, as well as low-frequency products such as 3GHz, 2.4GHz, and 1.5GHz.

Product Details

Advantages of ROF060M RF Fiber Optic Transmission Module

1. High bandwidth

2. Anti electromagnetic interference

3. Optional different wavelengths of light1310nm/1490nm/1550nm

4. Anti surge power protection, reliable power environment adaptability

5. Adaptive temperature compensation capability, controlling the stable output of the light source.

6. Compact and small volume

7. Applicable to * * standards.

Application scenarios

1. Pull the radar antenna far away

2. Long distance RF signal transmission

3. Radio signal monitoring

4. Microwave signal transmission coverage

5. Electronic Warfare

6. Radar signal delay

parameter table:

parameter name	unit	indicator value
frequency range	MHz	2000 – 6000
Link gain	dB	about0
flatness	dB	≤ ± 3.5
input1dBCompression point	dBm	≥ 0
VSWR	NA	≤ 2:1
*Large input RF signal	dBm	10
Noise Figure		<35
input/output impedance	Ohm	50
power supply method	VDC	6~12V
power consumption	W	<2 (single module)
Laser output wavelength	nm	1310/1550 orWDM
Laser output power	dBm	>0dBm
Detector operating wavelength	nm	1100~1650
Fiber optic connector type	NA	FC/APC interface
RF connector type	NA	SMA
size	mm	85 * 60 * 18 (excluding connectors))