Robot Laser Cladding Machine BFGK-R003

The large-scale rotary table laser cladding equipment mainly consists of a robotic arm, a casting rotary bed body, a moving slide rail, a high-power laser, a powder feeder, a laser head, a water cooler, etc. It can achieve laser cladding processing of large shafts, flat surfaces, complex curved surfaces and irregular parts.

Large-scale rotary table laser cladding equipment is mainly composed of manipulator, casting rotary lathe

body, mobile slide rail, high-power laser, powder feeder, laser head, water cooler, etc., which can realize laser

cladding processing of large shaft, plane and complex curved surface special-shaped parts

Product Features:

1. The laser cladding layer has a strong metallurgical bonding interface with the surface of the workpiece;

2. The laser energy control is centralized, and the heat input causes minimal deformation of the workpiece;

3. Greatly improve the surface wear resistance, corrosion resistance, and oxidation performance of parts;

4. Recycling and remanufacturing can extend the service life of equipment and save the use of finished products.

Product features

1.The laser cladding layer and the workpiece surface are the solid metallurgical bonding interface;

2.The laser energy is controlled centrally, and the deformation of workpiece caused by heat input is very small;

3.Greatly improve the wear resistance, corrosion resistance and oxidation performance of parts surface;

4.Recycled remanufacturing, prolonging the service life of equipment and saving finished products.