-
E-mail
htxinquan@126.com
-
Phone
1356165318318678184777
-
Address
Guoli Industrial Park, Huantai County, Zibo City
Product Categories
Huantai Xinquan Machinery Factory
Rolling machine manufacturer
NegotiableUpdate on 07/10
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Rolling machine manufacturer
Product Details
What is the reason for the oil leakage that sometimes occurs during the use of the three roll plate rolling machine?Rolling machine manufacturerRemind everyone to start looking for the reasons from the following factors.
1. Check the hole cover plate of the bending machine to see if the material is too thin. If the material is too thin, tightening the bolts can easily cause deformation of the board. Once the cover plate is deformed, oil leakage is also highly likely.
2. Excessive refueling can cause oil leakage. During the operation of the plate rolling machine, the oil tank will be stirred. If stirred too vigorously, lubricating oil will splash inside the machine. If the amount of fuel added is too much, splashing oil will accumulate on the shaft seal, contact surface, etc., eventually leading to oil leakage.
3. There is no oil return groove on the body of the rolling plate chassis, so lubricating oil will accumulate in the final shaft seal, end cover and other places. In addition, due to the influence of oil pressure difference, lubricating oil will drip down from the gaps.
4. The maintenance is not up to standard. When repairing the rolling machine, the dirt on the contact surface is not completely removed, or the sealant is not selected properly or the sealing ring is faulty, which can also lead to oil leakage of the equipment.
5. IfRolling machine manufacturerPoor annealing or aging treatment during the production and manufacturing process of the rolling machine can result in the failure to eliminate internal stress, ultimately leading to deformation and oil leakage.
In short,Rolling machine manufacturerReminder to everyone, regardless of the cause of oil leakage, once such a problem occurs, it should be dealt with in a timely manner to avoid greater negative impact.
