Roughness tester SE3500

Skidless or skidded methods can be used to measure the surface roughness of workpieces. Skidless can be used to measure short, narrow, and deep surfaces. The measurement settings can be memorized, and 9 sets of measurement setting parameters can be preset, which can be called up for use or displayed and printed with one click operation.

Characteristics of roughness tester SE3500
1. Skidless measurement method can be used to measure the surface roughness of the workpiece, and for short, narrow, and deep surfaces, Skidless can be selected for measurement.
3. The measurement settings can be memorized and pre-set with 9 sets of measurement setting parameters, and can be accessed, displayed, and printed out with one click operation.
4. Compared to other similar instruments, it has the highest resolution of 0.008um (convenient type).
5. Compliant with various international standards such as JIS, ISO, ASM, EDIN, etc.
6. Different probes can be selected according to the condition of the workpiece to meet the measurement requirements.
7. It can automatically execute measurement commands and print results in real time. After completing the measurement, the probe can automatically return.
8. It can be annotated or numbered on the data page.
9. Built in statistical mode, average mode output data maximum/minimum/average/deviation values, etc.
10. Equipped with a built-in fast charging battery, the battery level is displayed on the screen.
11. RS232C interface
12. Probe position out of range beep alert