Rubber plastic specific densitometer

Simple troubleshooting for rubber and plastic specific density meters, plastic density meters, rubber density meters,PVCParticle density analyzer,practicalTW-300SSolid liquid dual-use density tester,density meter,high precisionTW-124SSolid-liquid dual-purpose density meter, solid-liquid dual-purpose density balance,practicalTW-300TPowder specific densitometer,Powder specific density tester,economyTW-300KPrecious metal purity testerTW-300GLiquid specific gravity meter,economyTW-300ASolid specific density balance,Rubber density balance,Plastic density balance

Simple troubleshooting of rubber plastic specific density meter

Troubleshooting methods for fault phenomena

Machine crashes,No response when pressing any key Like a display screenOL ERROR 1 888888or0.00g

When placing the product on the measuring table,Unable to display the weight of the product correctly or no response

1. Check if the environment in which the machine is placed is stable,Is the windproof cover installed properly

2. Check if the test bench is completely placed,And whether the suspended railing in the water touches the sink

3. After the above inspection,And after handling it properly,If it still cannot be used normally,Please follow the steps below to process

Detailed technical parameters of digital rubber density meter:

1. Density analysis:0.001 g/cm3

2. 最大称重：120g200g 300g 600g

3. Minimum weight:0.001g0.001g 0.01g

4. Measurement range:0.001—19.999g/cm3

Measurement steps:

① Place the sample to be tested on the measuring table, measure the weight in the air, and pressEKey memory.

② Place the sample to be tested in water and measure its weightEKey memory, the machine directly displays density values.

This product has undergone strict quality inspection before leaving the factory,Only after passing the inspection can it be sold from the factory,Please feel free to use it with confidence from all manufacturers!

Daily operation precautions:

During each testing process of specific gravity,When other tools are needed for assistance,Like anti floating frame,glass,When playing tennis or other tools,Please shut down at the end of use,Be sure to remove all the tools previously placed in the test bench,And be sure to deduct zero before shutting down,When used next time,Put in the necessary tools again.Using this method will reduce the occurrence ofOLThe malfunction.Factory direct sales, welcome to call!

To learn more information,Please log in to our websitehttp://www.1718cheng.com Or call for consultation:Kang Yulin0592-518-7269 187-5927-8268 QQ：958-747-345

Taiwan Mazhak Rubber Density Meter,Rubber density meter operation video,Rubber density detector,Rubber block density tester,Rubber seal density meter,Rubber specific gravity meter,Rubber density balance,Rubber specific gravity balance