SHEX1619DG Chongqing Open Shake Bed

Technical parameters of Chongqing open shaking table

1. Speed range: 15-500 rpm

2. Speed accuracy: 100 rpm ± 1% higher than the set speed but less than 100 rpm ± 1 rpm

3. Timer: 1 second to 160 hours

4. Circular diameter: 19 mm

5. Maximum load capacity: 16 kg

6. Tray material: Aluminum

7. Tray size (length x width): 27.9 x 33 cm

8. Dimensions (length x width x height): Shaker: 29.4 x 35.5 x 14.9 cm

9. Dimensions (length x width x height) Remote control: 15.0 x 35.6 x 11.2 cm

10. Transport weight: 22.2 kg

Chongqing Open Shake BedOperation characteristics

1. Accu Drive Swinging System: * The Accu Drive Swinging System provided and obtained ensures excellent speed control, accuracy, and durability. The shaking system continuously monitors the shaking speed and maintains the set value, even when changing the load. When the equipment is set to a speed greater than 100 rpm, the speed accuracy is ± 1% of the set speed. When the equipment is set to a speed below 100 rpm, the speed accuracy is ± 1 rpm.

2. Microprocessor controller: The variable speed microprocessor control device ensures * and uniform shaking action. The microprocessor will display the last set point, which can be restarted after power failure.

3. Three eccentric axis balanced drive: * Lubricated ball bearings and maintenance free brushless DC motor ensure reliable operation and continuous operation.
4. Remote control: The control module is suitable for placement outside the constant temperature incubator. The settings can be easily viewed or changed from the outside of the constant temperature incubator without disturbing the temperature of the incubator. The length of the thin ribbon cable is 1.68 meters, and it can be easily threaded through the multi-purpose port of the incubator to the bottom of the constant temperature incubator door. The controller is fixed to the door of most constant temperature incubators by magnets and can also be placed on laboratory workbenches.

5. LED display screen: Controlled through a touchpad and equipped with an easy to read independent speed and time LED display screen, allowing operators to view both settings simultaneously. Always provide reproducible and accurate results that can be easily viewed on the laboratory workbench. The timer will display the used time and can also be programmed to a user-defined limit to automatically shut down the device when the time reaches zero. The display screen will show the settings from the last use, even after a power outage.

6. RS232 interface: Provides bidirectional communication for data recording and device control.

7. Speed calibration mode: allows users to automatically recalibrate the speed display screen.

security guarantee

1. Overload protection: When the system detects an obstacle, it will emit an audible and visual signal.

2. Slow acceleration design: Slowly increase the speed to the target set value to prevent the sample from splashing out.

3. Alarm: In timed mode, the alarm will sound when the time reaches zero. The alarm has an optional mute function that can be set through the touch panel.
4. Anti overflow design: Use a diversion groove to keep the fluid away from internal components.

Extreme environmental split working conditions in the United States at O'Hare

1. The device can operate in a freezer, incubator, or non condensing carbon dioxide environment with temperatures ranging from -10 to 60 ° C and humidity up to 100%.

application

1. Cell culture, solubility research, and extraction process.