SHRC0719DG American Ohhaus digital control reciprocating shaker

1、 Technical parameters of the American Ohhaus SHRC0719DG digital control reciprocating shaker:

1. Speed range: 20-300 rpm

2. Speed accuracy: 100 rpm ± 1% higher than the set speed but less than 100 rpm ± 1 rpm

3. Timer: 1 second to 160 hours

4. Travel distance: 19 mm

5. Maximum load capacity: 6.8 kg

6. Tray material: Aluminum

7. Tray size (length x width): 27.9 x 33 cm

8. Dimensions (length x width x height): 41.3 x 35.5 x 14.6 cm

9. Transport weight: 22.2 kg

2、 Operating characteristics of the American Ohhaus SHRC0719DG digital control reciprocating shaker:

The swing system in both models will continuously monitor the swing speed and maintain the set value, even when changing
The same applies when under load. When the equipment set speed is greater than 100 rpm, the speed accuracy is the set speed
± 1% of the degree. When the equipment is set to a speed below 100 rpm, the speed accuracy is ± 1 rpm.
2. Microprocessor controller: The variable speed microprocessor control device ensures * and uniform shaking action.
The microprocessor will display the last set point, which can be restarted after power failure.
3. Single eccentric shaft drive: * Lubricated ball bearings and maintenance free brushless DC motor ensure reliable performance
Relying on operation and continuous work.

4. LED display screen: controlled through touchpad, with independent speed and time that are easy to read
LED display screen, allowing operators to view two settings simultaneously. Always provide reproducible and accurate
As a result, it can be easily viewed on the laboratory workbench. The timer will display the time that has been used, and it can also be adjusted
It is programmed with user-defined limits to automatically shut down the device when the time reaches zero. display screen
The last used settings will be displayed, even after power failure.

5. RS232 interface: Provides bidirectional communication for data recording and device control.

6. Speed calibration mode: allows users to automatically recalibrate the speed display screen.

3、 American Ohhaus SHRC0719DG digital control reciprocating shaker safety guarantee:

1. Load sensor: The built-in load sensor will detect the imbalance and automatically reduce it to
Safe speed to protect the sample.
2. Overload protection: When the system detects obstacles or overloaded trays, it will emit sound and light signals.

3. Slow acceleration design: Slowly increase the speed to the target set value to prevent the sample from splashing out.

4. Alarm: In timed mode, the alarm will sound when the time reaches zero. alarm
The device has an optional mute function that can be set by touching the tablet controls.
5. Anti overflow design: Use a diversion groove to keep the fluid away from internal components.

4American Ohhaus SHRC0719DG digital control reciprocating shakerWorking conditions:

1. The device can be used in a freezer, incubator, or non condensing environment with temperatures ranging from -10 to 60 ° C and humidity up to 80%
Operate in an oxidized carbon environment.
5Application of SHRC0719DG digital control reciprocating shaker in the United States:

1. Cell culture, solubility research, and extraction process.