SHWV02AL American Ohhaus simulation control 3D wave shaker

1、 Technical parameters of the American Ohouse SHWV02AL simulation control 3D wave shaker:

1. Speed range: 1-75 rpm

2. Tilt angle: 0-16 °

3. Timer: 1 to 120 minutes

4. Maximum load capacity: 2.3 kg

5. Tray material: Aluminum

6. Tray size (length x width): 35.6 x 27.9 cm

7. Dimensions (length x width x height): 42.5 x 27.9 x 16.5 cm

8. Shipping weight: 7 kg

2、 The operating characteristics of the American Ohouse SHWV02AL simulation control 3D wave shaker:

1. Low body design: takes up less space and can easily enter most fume hoods and incubators. cast
The aluminum base provides durability and higher stability.

2. Microprocessor controller: The tilt angle can be adjusted, and the fluctuation angle can be easily adjusted while the device is running,
The angle adjustment range is 0 ° to 16 °. Smooth speed control for low-speed fluctuating motion.

3. Independent control knob: Speed, tilt, and time are controlled with independent knobs for easy and convenient adjustment.

3、 American Ohouse SHWV02AL simulation control 3D wave shaker safety guarantee:

1. Overload protection: When the system detects obstacles or overloaded trays, it will emit sound and light signals.

2. Slow acceleration design: Slowly increase the speed to the target set value to prevent the sample from splashing out.

3. Timing range: If timing is enabled, the fluctuation action will automatically stop when the timer reaches zero.

4. Anti overflow design: Use a diversion groove to keep the fluid away from internal components.

4、 The working conditions of the American Ohouse SHWV02AL simulation control 3D wave shaker:

1. The device can be installed in a freezer, incubator, or non condensing environment with a temperature of -10 to 60 ° C and a humidity of up to 80%
Operate in the environment.

5Application of the American Ohouse SHWV02AL simulation control 3D wave shaker:

1. Staining and decoloring gel, hybridization procedure, hematology and impregnation technology.