SHWV02DG American Ohouse Digital Display Control 3D Wave Shaking Table

NegotiableUpdate on 05/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Ohhaus digital control 3D wave shaker provides precise speed control, as well as a smooth, non bubble "3D" wave mode for the sample. Suitable for various laboratory applications, designed specifically to cope with complex environments. The tray is equipped with anti slip rubber pads, suitable for holding Petri dishes.

Product Details

1、 Technical parameters:

1. Speed range: 1-30 rpm

2. Speed accuracy: ± 1 rpm

3. Tilt angle: 0-20 °

4. Timer: 1 second to 160 hours

5. Dimensions (length x width x height): 41.3 x 25.4 x 16.5 cm

6. Transport weight: 7.3 kg

2、 Operation characteristics:

1. Low body design: takes up less space and can easily enter most fume hoods and incubators. cast
The aluminum base provides durability and higher stability.

2. Microprocessor controller: The microprocessor control provides electric tilt adjustment, allowing users to install
Easily adjust the fluctuation angle from 0 to 20 ° while running. Accurate speed control function,
Not only can it ensure the uniformity of oscillation, but it can also reach as low as 1 rpm.

3. LED display screen: controlled through touchpad and equipped with easy to read independent speed and tilt
The degree and time LED display screen allows operators to view all settings simultaneously. Always provide repeatability
Accurate results can be easily viewed on the laboratory workbench. The timer will display the used time
It can also be programmed as a user-defined limit to automatically close the device when the time reaches zero
Set. The display screen will show the previous settings, even after a power outage.
3、 Security guarantee:
1. Overload protection: When the system detects obstacles or overloaded trays, it will emit sound and light signals.

2. Slow acceleration design: Slowly increase the speed to the target set value to prevent the sample from splashing out.

3. Alarm: In timed mode, the alarm will sound when the time reaches zero.

4. Working conditions for overflow prevention: Measure: Use a diversion groove to keep the fluid away from internal components.

4、 Working conditions:

1. The device can be installed in a freezer, incubator, or non condensing environment with a temperature of -10 to 60 ° C and a humidity of up to 80%
Operate in the environment.

5、 Application:

1. General mixing of blood samples, DNA extraction, soaking techniques, and various sizes of test tubes.