Sanitary grade Y-shaped filter

Sanitary grade Y-shaped filter

Sanitary grade Y-shaped filter

install

Before installing the filter, carefully clean the threaded connection surfaces of all pipes and use pipe sealant or PTFE tape (polytetrafluoroethylene)

Be moderate. The end threads are not treated to prevent sealant or PTFE tape from entering the piping system. Filters can be installed horizontally or

Install vertically downwards.

Warning

When installing socket weld filters with a diameter of 1-1/4 '(DN32) or larger, or all D-series filters, attention should be paid to the gasket of such filters

The sheet is made of non-metallic material and is prone to damage due to overheating. Therefore, the welding time should be shortened and the filter should be inspected after welding is completed

Cooling. If preheating is required before welding or heating needs to be continued after welding (D-series filter), it is recommended to remove the gasket before heating.

Operation and maintenance of filters

After the system has been working for a period of time (usually not exceeding one week), it should be cleaned to remove the accumulated filter during the initial operation of the system

Impurities and dirt online. Afterwards, regular cleaning is required. The frequency of cleaning depends on the working conditions. If the filter does not have a drain plug,

When cleaning the filter, the filter screen limiter and filter screen should be removed.

Warning: Before each maintenance or cleaning, the filter should be isolated from the pressurized system. After cleaning, a new seal should be used when reinstalling

Sealing pad.

Working Principle:

After the medium flows into the filter element inside the cylinder from the inlet of the filter, a small amount of solid particles are removed to maintain the normal operation of other equipment. When the fluid enters the filter cylinder, particles or impurities larger than the precision of the filter screen are blocked inside the filter screen, and clean liquid is discharged.

Y filter is a sanitary grade filter used to filter out particle damage caused to pumps or other equipment and instruments. It is widely used in the fields of pharmaceuticals, beverages, dairy products, etc