- Phone
-
Address
No. 100 Baisha Avenue, Jiangnan District, Nanning City
Guangxi Guangpu New Energy Equipment Co., Ltd
No. 100 Baisha Avenue, Jiangnan District, Nanning City
Guangpu GuichuanUltraviolet sterilizerIt is a series of sterilization and disinfection equipment developed and produced for UV water treatment based on the mature application of UV technology. Guangpu products have mature technology, rich categories, and complete qualifications, which can meet the needs of various industries for water disinfection.
GuangpuSmall and medium flow ultraviolet sterilizerIt is a UV sterilization equipment with high sterilization efficiency, suitable for sterilization and disinfection of purified water, pure water, ordinary domestic water, and sterile water. It is an effective equipment for the transformation and disinfection of household water and rural drinking water.
Guangpu small and medium flow ultraviolet sterilizer has a wide range of sterilization, rapid sterilization, and can act on all microorganisms, including bacteria, viruses, fungi, and protozoa (Cryptosporidium and Giardia)
After disinfection, no other side effects are produced, no impurities are introduced into the water, and the physical and chemical properties of the water remain basically unchanged.
Low cost, small footprint, simple installation, easy operation, and convenient maintenance.
Suitable for disinfection of secondary water supply in residential areas, rural drinking water, and landscape water.
The small and medium flow ultraviolet sterilizer is horizontally installed indoors, with the bracket fixed on a designated foundation or workbench. (Connect the inlet and outlet) The sterilization device is located indoors. In addition to considering the convenience of water supply and drainage and meeting the requirements of the process flow, attention should also be paid to leaving an installation position that can extract the ultraviolet lamp tube and space. The electrical control box is installed near the device, with a relative humidity of no more than 80 ℃, no corrosive gases, no conductive dust, and no strong vibration and impact.
Small and medium flow ultraviolet sterilizer, with two water outlets that can be selected as the inlet and outlet according to the pipeline direction. It can be placed horizontally or vertically according to user needs. To facilitate the replacement of light tubes and quartz tubes, there should be space of the same length on one side of the equipment.
After product installation, conduct a water test to ensure no water leakage, and then connect the power supply.
After connecting the power supply, the indicator light will turn on to ensure that the lamp head and lamp tube are connected properly. Then, press the "power switch" button on the dust cover and the lamp tube indicator light will turn on. The timer will rotate and wait for 3-5 seconds for the lamp tube to light up. At this time, the equipment will operate normally. After confirming that the lamp tube is on for 3-5 minutes, first open the water valve, and then open the water inlet valve. At this point, the machine will start running.
Installation case: