Tube heat exchanger/heating cooler

Tube heat exchanger/heating cooling heat exchanger

To users: If you need to know more about our tube heat exchangers/heating cooling heat exchangers, please patiently review our following instructions about tube heat exchangers, which will greatly facilitate your selection. If you need to learn more, please consult us.

Overview of Application of Coil Heat Exchanger

DongdingdesignofGHRPType coil heat exchanger，Applied for instant heating or cooling of fluid materials such as pharmaceuticals, food, biotechnology, oils, pigments, chemicals, etc.

Structural Description of Coil Heat Exchanger

This coil type heat exchangerAdopting spiral double setswith one heartCoil structure，Concentric circular sleeve composed of two different sizes of stainless steel pipes(Commonly known as large pipe sleeve small pipe)，The outer tube is the shell side(Heating or cooling medium)，The inner tube is the tube side(Entering materials)，More suitable for instant cold and hot exchange between high-temperature and cold materials when the inner and outer pipes are separately fed(alreadyCold materials are heated, while hot materials are cooled. note：Using hot and cold material exchange，High thermal energy utilization efficiency and low unit energy consumption).

Advantages of East Top Coil Heat Exchanger

1.Using stainless steel thin-walled tubes(SUS304orSUS316L，The inner pipe wall is only1.0～1.5mm)High heat transfer efficiency.

2.Mirror polishing treatment on the surface of the inner and outer pipes，Smooth and non scaling material.

3.Circular diameter coil ensures a single and smooth direction of material flow，No blockage or accumulation of materials，More suitable for instant cold and hot exchange between high-temperature and cold materials when the inner and outer pipes are separately fed.

4.good sealing performance，Not easy to leak，The inner and outer tubes can withstand pressure0.5MPa.

5.Cleaning Method：Pump clean water or hot water for cleaning，also canCIPwash(note：The coil cannot be disassembled and cleaned).

6.According to the requirements of material heat exchange temperature value，Assemble into several circular tube shell assemblies(Composed of different heat exchange areas).

7.A thermometer is installed at the discharge outlet，Easy to observe the discharge temperature value.

8.Easy to install，Only connect the material inlet and outlet and heat exchange medium inlet and outlet on the equipment to the corresponding pumps and pipelines.

9.Low cost of use，The vulnerable parts only have sealing gaskets on the inlet and outlet ports，And it is easy to replace.

10.The coil is installed inside a stainless steel tank，Compact structure and small footprint，Equipment appears aesthetically pleasing.

Main specifications and parameters of coil heat exchanger