VS330 Compass

NegotiableUpdate on 03/26

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

VS330 Compass

Product Details

Hemisphere VS330

DESCRIPTION

Vector VS330 adopts Eclipse Vector patented technology from Hemisphere GPS company, and the optimized Eclipse Vector technology brings a series of new experiences to Vector VS330: undulating, pitch, roll output, and more powerful orientation and positioning performance;

The Vector VS330 receiver, with its own display and user interface, can be conveniently installed on terminal devices; Dual GPS antennas can be installed separately according to the user's directional accuracy requirements;

Vector VS330 GNSSKey advantages of the receiver

Excellent directional accuracy, including short baseline and antenna spacing up to 10 meters

U L1/L2 GPS/GLONASS RTK function

U supports L-band DGNSS/HP/XP (OmniSTAR) ®) technology

U Acceptable beacon

Fast RTK convergence and reacquisition time

Excellent carrier smoothing performance

5cm RTK effective value fluctuation accuracy

Powerful technology for suppressing multipath effects and interference

GPSPerformance specifications
Receiving type	Vector GNSS L1/L2 RTK
Acceptable signal	GPS, GLONASS, Galileo (requires update)
Number of channels	270
GPS sensitivity	– 142dBm
SBAS tracking	3 channels, parallel tracking
Update rate	Standard 10Hz, 20Hz authorized
Horizontal Accuracy	RMS（67%）2DRMS（95%）
RTK	10 mm + 1 ppm 20 mm + 2 ppm L-band DGNSS/HP/XP
SBAS (WAAS)	0.25 m 0.50 m
single-point	1.2 m 2.5 m
Orientation accuracy	<0.17 ° rms @ 0.5m antenna spacing <0.09 ° rms @ 1.0 m antenna distance <0.04 ° rms @ 2.0 m antenna spacing <0.02 ° rms @ 5.0 m antenna distance < 0.01˚ rms@10.0 M antenna distance
Fluctuation accuracy	30cm (DGPS), 10cm (RTK)
Timing accuracy (1PPS)	20 nanoseconds
Turning rate	Maximum up to 100 ° C/s
Compass safety distance	30cm (with casing)
cold start	<40 seconds (no calendar or clock)
warm start	<20 seconds typical (with almanac or clock)
hot start	<5 seconds typical (with almanac, clock, and location)
course correction	<10 seconds typical (effective positioning)
maximum speed	1850 kilometers per hour (999 nautical miles per hour)
Maximum altitude	18288 meters (60000 feet)
Pitch/roll accuracy	< 1˚rms
Beacon performance specifications
Number of channels	2 channels, parallel tracking
Frequency range	283.5–325 kHz
operation mode	Manual, automatic, and database
agreement	IEC 61108-4 Beacon Standard
L-band DGNSS/HP/XPPerformance specifications
sensitivity	– 130dBm
Channel Spacing	7.5 kHz
Satellite selection	Manual and automatic
Re capture time	15 seconds (typical)
suppression	15 kHz spacing>30 dB, 300kHz spacing>60 dB
processor	DSP providing differential algorithm processing based on digital demodulation and protocol decoding modules
Command support	Obtain L-Band DGNSS/HP/XP (OmniSTAR) area, satellite information, allow input and query of L-Band DGNSS/HP/XP (OmniSTAR) authorization information, receive quality indication of error rate output, and manual frequency adjustment
communication
serial port	2 full duplex RS 232 ports, 1 full duplex RS 422 port
USB Port	1 USB-A
Baud rate	4800 – 115200
Correct input/output protocol	RTCM v2.3 (DGPS), RTCM v3 (RTK), CMR, CMR+
Data Input/Output Protocol	NMEA0183, Crescent Binary
Timing output	1PPS CMOS, low power frequency, synchronous descent, 10 Ω, 10pF load
power supply
INPUT VOLTAGE	8–36 VDC
Power consumption	<6.2 W rated (GPS (L1/L2), GLONASS (L1/L2), and L-band DGNSS/HP/XP) <5.3 W rated (GPS (L1/L2) and GLONASS (L1/L2))
electric current	<0.52 A rated (GPS (L1/L2), GLONASS (L1/L2), and L-band DGNSS/HP/XP) <0.44 A rated (GPS (L1/L2) and GLONASS (L1/L2))
power isolation	500 V
reverse polarity protection	correct
Antenna circuit protection	correct
Antenna input impedance	50Ω
environment
operation temperature	-30 ℃ to+70 ℃ (-22 ° F to+158 ° F)
storage temperature	-40 ℃ to+85 ℃ (-40 ° F to+185 ° F)
humidity	95% non condensing (installed in the casing)
Shell grade	IP 66（IEC 60529）
shock and vibration	Mechanical impact: EP455Section 5.14.1 Homework (installing in a housing with screw holes) EP455 Vibration: Section 5.15.1 Random
EMC	CE (IEC 60945 Emissions and Immunity) FCC Part 15, Subpart B CISPR22
physics
size	20.2 length x 12.0 width x 7.5 height (cm)
weight	1.1 Kg
Status indicator (LED)	Power supply, first and second GPS locking, differential locking, DGPS positioning, heading, RTK locking, L-band DGNSS/HP/XP lock
Power switching	front panel
Power/data connector	9-pin ODU metal circle
Power Connector	2-pin ODU metal circle
Data Connector	DB 9 (sealed)
Antenna Connector	Double TNC (female head)
auxiliary equipment
gyroscope	Provides smooth heading, fast directional reacquisition, and reliability<5 ° per minute. In the event of GPS signal loss, continuous directional time can last up to 3 minutes
Tilt Sensor	Provide pitch and roll data to assist in providing quick start-up and re capture in directional solutions