Wire and cable smoke density testing machine

Technical parameters of wire and cable smoke density testing machine:

Basic parameters:

Product model: 5707

Execution standards: IEC 61034, BS 6853, GB/T17651.1~2

Box size: 3000mm X 3000mm X 3000mm. It can be a brick wall structure or a steel plate structure, depending on the customer's choice.

Inner box material: SUS 304 stainless steel, thickness 2mm

Instrument rack: 19 inch standard instrument with sliding wheels, 2mm thick cold plate, AL9002 standard color spray coating

Exhaust duct: Stainless steel standard duct

Combustion fixture: SUS304 stainless steel customized

Laboratory door: transparent glass observation window

Internal filling: Calcium silicate fireproof material

Outer box material: cold plate+outdoor grade powder coating paint

Laboratory doors and observation windows:

Transparent light side windows are installed on opposite walls on both sides

Left and right side air compressor blowing device

Open ventilation holes on the ground level of the box to ensure balanced atmospheric pressure inside and outside the box

The top of the box is equipped with a centrifugal fan to eliminate smoke generated during testing

Power supply: AC 220V 50/60HZ 20A

Nominal power of light source: 100W

Nominal voltage of light source: DC12V

Nominal luminous flux: 2000lm to 3000lm

Alcohol capacity: 1L ± 0.01L

Fan blade: 300mm

Fan airflow: 7-15 cubic meters per minute

Instrument and electrical appliances: 200V 50Hz

Combustion device:

Electric spark ignition device ensures the safety of testing personnel

Combustion testing bracket

Stainless steel alcohol tray

Optical system:

DC 12V halogen lamp power: 100W

The light source is accepted as a silicon photovoltaic cell

Optical path calibration system, 0, 0.1, 1, 30, 100% point calibration

Testing software:

Fully computer-controlled smoke density testing software

Control system:

Controller: Advantech Industrial Computer+NI Platform Development Professional Software System

Display: 17 inch LCD monitor

Data acquisition card: Advantech Industrial motherboard

Data management: NI development platform testing software, accurate and reliable measurement data, automatic generation of test reports, directly connected to printers.

The standards that the wire and cable smoke density testing machine meets are:

IEC 61034、BS 6853、GB/T17651.1~2